Cooker ring trips rcd | on ElectriciansForums

Discuss Cooker ring trips rcd in the Australia area at ElectriciansForums.net

O

optician

Hi, wonder if anyone can help?
I have an old electric cooker on an RCBO cooker circuit, and one of the rings trips the RCBO when you turn it on, does this mean the element needs replacing?
 
How old is the cooker.Maybe you should think about replacing the cooker:eek:An RCBO detects earth leakage and overload.If it trips when you turn on 1 of the rings,sounds like the ring itself is faulty
 
Last edited by a moderator:
It works apart from this one ring, and I'm assuming it would be cheaper to replace the element, rather than buy another cooker, although I can see where your coming from. Just wondered if anyone could say for sure.
 
How would the faulty ring/element test using the insulation and continuity tester, I,ve been trying to test it and proove a fault but all rings seem to give similar results, yet they work? Am I going about this the wrong way?
 
How would the faulty ring/element test using the insulation and continuity tester, I,ve been trying to test it and proove a fault but all rings seem to give similar results, yet they work? Am I going about this the wrong way?

would suspect it would be the insulation test that would show the fault. Test carried out dead and only showing the fault when that ring is switched on.Test on 500V between L+E and N+E correct readings would be greater than 1000M ohms. Very low reading would indicate a fault.
 
You would have to disconnect the ring to do an insulation test to earth as they are all connected to a common neutral,otherwise you would get the same leakage reading at each ring due to the neutral link between them all.
 

Reply to Cooker ring trips rcd in the Australia area at ElectriciansForums.net

News and Offers from Sponsors

  • Article
Join us at electronica 2024 in Munich! Since 1964, electronica has been the premier event for technology enthusiasts and industry professionals...
    • Like
Replies
0
Views
288
  • Sticky
  • Article
Good to know thanks, one can never have enough places to source parts from!
Replies
4
Views
792
  • Article
OFFICIAL SPONSORS These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then...
Replies
0
Views
818

Similar threads

  • Question
Replies
2
Views
992
Seen this where T&E has been fixed with a flat bend of too tight a radius.
2 3
Replies
35
Views
1K

OFFICIAL SPONSORS

Electrical Goods - Electrical Tools - Brand Names Electrician Courses Green Electrical Goods PCB Way Electrical Goods - Electrical Tools - Brand Names Pushfit Wire Connectors Electric Underfloor Heating Electrician Courses
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc

YOUR Unread Posts

This website was designed, optimised and is hosted by untold.media Operating under the name Untold Media since 2001.
Back
Top