Could I use this cable maybe ?

[sythai]

Hi Guys

Putting in 1st fix for ASHP, control cable between inside and outside units specified is the following:

4 x 0.75mm CANBUS (screened)

I believe it’s a type of belden.

Do have some of this on site hoping may do the job - see attached.

Anyone help please…. As not so familiar with AWG cable sizes ?

Thanks Sy

 

[snowhead]

Data sheet below, but

2 x 16awg = 1.5mmsq
2 x 22awg = 0.34mmsq (foil wrapped)

https://scpcat5e.com/media/custom/pdfs/CTRL-2-LSZH.pdf

 

[sythai]

Data sheet below, but

2 x 16awg = 1.5mmsq
2 x 22awg = 0.34mmsq (foil wrapped)

https://scpcat5e.com/media/custom/pdfs/CTRL-2-LSZH.pdf

Thank you
Close, but not quite enough ....

 

[Electro-tech]

https://ideadigitalasset.com/DAMRoot/Original/11854/10977_ZCERIPQ2GUVOHDWF.pdf

 

[sythai]

18 AWG.... equivalent to 0.75mm, thats the one reckon I need

 

[davesparks]

That's a pretty rubbish way to specify cable in my opinion, CANBUS is a communication protocol, not a type of cable!

I'd ask for clarification on exactly what they want personally.

Based on the information supplied, and my limited experience with CANBUS, I'd expect YY/CY to be suitable. But I could easily be way off the mark.