Doing an rcd on a rcbo

[waitees]

Hi Guys

Not had much dealings with rcbo and i have just had to install 2 on a small consumer board, first is for radial circuit for the sockets and second is for lights.

The question is when i come round to testing the rcd side of the rcbo how can i test this on the lighting circuit. When i test the sockets using my kt64 i use the fused plug adapter.

I would be very grateful for any help !

 

[ukpablo]

just test it at the cu, line, neutral probes straight across relevent terminals on rcbo and eatrh probe across earth bar..............or at light fitting?!............either or will do the same.

hope this helps.

 

[Deleted member 9648]

Use fused probes.... as above either at the light or on the load side at the DB.