L
LeonardS
Bit confused what to put for description of test and expected results and not sure if visual inspection should be included in dead tests
dead tests
Type of test Description of test expected results
Visual Inspection ? ?
Continuity of C.P.C ? 0-0.5Ohms
Continuuity of Ring Final Circuit ? 0-0.5Ohms
Insuulation Resistance ? >1Meg Ohm
Dead Polarity ? ?
live tests
Live Polarity ? ?
Earth loop Impednance ? ?
RCD test ? <40ms < 300ms?
Ze ? 0.35Ohms
dead tests
Type of test Description of test expected results
Visual Inspection ? ?
Continuity of C.P.C ? 0-0.5Ohms
Continuuity of Ring Final Circuit ? 0-0.5Ohms
Insuulation Resistance ? >1Meg Ohm
Dead Polarity ? ?
live tests
Live Polarity ? ?
Earth loop Impednance ? ?
RCD test ? <40ms < 300ms?
Ze ? 0.35Ohms