EIC help

[Hogshaw]

Hey all,

im doing my 2394 course on next available date and I'm trying to get my head around some things so hope you can help.

I was wondering till what extent control cabling is expected to be tested according to regs. E.g a 110v emergency stop circuit or a 110v motor heater circuit should these be tested?

Is there a voltage and anything over that voltage the cable must be tested??

 

[shanky887614]

Hey all,

im doing my 2394 course on next available date and I'm trying to get my head around some things so hope you can help.

I was wondering till what extent control cabling is expected to be tested according to regs. E.g a 110v emergency stop circuit or a 110v motor heater circuit should these be tested?

Is there a voltage and anything over that voltage the cable must be tested??

have a look at ir, it tells you what your looking for in the regs.


if i remember right its 250v but dont quote me on it i cant remember (there are different voltages for extra low voltage upto main voltage (1kv+)



there is a table with the different values, ill check later and post in here if someone doesn't beat me to it

 

[Paul.M]

110V and ELV should be tested at 250Vdc IR.