M
Matt Thornton
Could anyone tell me the BS or EN No for a Dorman Smith ELCB, 100A/30mA/4Pole. Also, does this still conform to the 17th edition? Thanks in advance. Matt
Discuss ELCB BS No needed urgently in the Periodic Inspection Reporting & Certification area at ElectriciansForums.net
61008 is the number now
how old is the rcd
how old is the rcd
OP
Matt Thornton
It's in a 8 way Merlin Gerin board (loadlimiter) at a guess i'd say 10 years, does it still comply ? & is it an RCD?
OP
Guest123
Hi.
The BS number for RCD's changed on 1st July, 2000, from BS 4293 to BS 61008.
If yours is 10 years old then it'll be a 4293.
The BS number for RCD's changed on 1st July, 2000, from BS 4293 to BS 61008.
If yours is 10 years old then it'll be a 4293.
Reply to ELCB BS No needed urgently in the Periodic Inspection Reporting & Certification area at ElectriciansForums.net
News and Offers from Sponsors
- Sticky
- Article
Wicked I've just actually looked through it and it's very smart. Some good stuff in it.
There's a tile association company that do a magazine...
- Electrical2go
- Forum Sponsor News and Offers
- 2
- 277
- Article
OFFICIAL SPONSORS
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then...
- Dan
- Forum Sponsor News and Offers
- 0
- 269
- Article
Hi everyone,
Another weekend, another sale!
Get ready for colder days with Haverland Radiators, combining efficiency with modern design. Keep...
- Electrical2go
- Forum Sponsor News and Offers
- 0
- 350
Similar threads
- Article
Help Needed: Fixing My Damaged Tub with Devcon Metal Patch & Fill Hey everyone,
I have a pretty messed up tub that I need to fix, and I'm hoping...
- NETSURFER802
- Plumbers Forums
- 0
- 229
- Question
Yes, gravity mode is not used much now, (thank goodness) it was for old systems where the hot water from the boiler convection circulates to the...
- petedavids69
- UK Electrical Forum
- 5
- 1K
OFFICIAL SPONSORS
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc
YOUR Unread Posts
-
3 light chandelier issue, 2 bulbs are dim but if I install the 3rd, the other 2 go off.Holy cowpokes Batman! It worked! Swapped out the dimmer switch to a regular single-pole...
- Latest: the1tater
-
-
IR readingThere aren’t any outside electrics on the circuit. Could the induced voltage be a clue.
- Latest: Richard100762
This website was designed, optimised and is hosted by untold.media Operating under the name Untold Media since 2001.