T
Tommythain
Has anyone else had a problem with the evantage pir type EVPIRFL REC PIR in setting the off time as I am having a problem getting them to stay switched for a set length of time?
Discuss EVANTAGE PIR's in the Australia area at ElectriciansForums.net
Reply to EVANTAGE PIR's in the Australia area at ElectriciansForums.net
News and Offers from Sponsors
- Article
Join us at electronica 2024 in Munich! Since 1964, electronica has been the premier event for technology enthusiasts and industry professionals...
- Sticky
- Article
Good to know thanks, one can never have enough places to source parts from!
- Electrical2go
- Forum Sponsor News and Offers
- 4
- 841
- Article
OFFICIAL SPONSORS
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then...
- Dan
- Forum Sponsor News and Offers
- 0
- 962
Similar threads
You would have thought they'd have a switch to flick on and off to engage an override. Not on each PIR but an actual light switch
- timhoward
- Periodic Inspection Reporting & Certification
- 5
- 1K
That will work fine as long as the Pirs use relay switching, some don't.
- samjones04
- DIY Electrical Advice
- 2
- 518
OFFICIAL SPONSORS
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc
YOUR Unread Posts
-
Minor works - Zdb & R1R2 testsThanks for the reply if a zdb test were to be measured would it then be acceptable to do point 2?
- Latest: tomodo
-
Thermostat ProblemI agree with Avo Mk8 that it seems that the relay box has got stuck and the 2 way communication...
- Latest: Alk
-
Xmas lights1. 13A or 3A…. It’s only there for short circuit, not overload. 2. Why is it suspect? It’s 2...- Latest: littlespark
This website was designed, optimised and is hosted by untold.media Operating under the name Untold Media since 2001.