Fault codes

[GBS]

I would like to know the correct recommendation code to give to a distribution board which is not fitted with a main swithed disconnector. The DB in question is an (old english electric) board, which is fitted with BS88 fuses, it is supplied from a main switch bank in another room.

 

[Deleted member 9648]

As long as the isolator in the switch bank in the other room is lockable in the off position no code is applicable. 537.2.1.5


Edit...forgot to say,if the main switch is not lockable I would code it 2.

 

[GBS]

Thanks wirepuller,I had it as a code 2, all i need to check is if the main isolator in switchbank is lockable.