Ferrule crimpers | on ElectriciansForums

Discuss Ferrule crimpers in the Electrical Tools and Products area at ElectriciansForums.net

goasis

-
Joined
Mar 8, 2015
Messages
335
Reaction score
439
Location
berks
Hi, just a simple one, ferule crimpers seem to come in a huge price range, are the sub ÂŁ30 amazon ones worth it?
 
got a similar 1 off ebay. ÂŁ14.99 with the box of ferrules. can't fault it.
 
I have a couple of ferrule crimpers and the self-adjusting ones that @buzzlightyear linked to are by far the easiest to use, so get them as your starting point. They will do 99% of jobs perfectly.

Having to get the ferrule in to the right gap in the sized sort is more effort and if it get stuck in the wrong one (or the "inverse gap" between sizes) is a bit of a pain!

However, those cheap self-adjusting ones don't crimp sizes from 0.5mm or below well, not really a problem for power wiring though. For that I still use some simple manual crimpers like these:

I also have an expensive RS set for 10-35mm that is handy for tri-rated or dual 6mm ferrules, etc. They do a very good job but are hard to justify for most folk's jobs:
 
Hi, just a simple one, ferule crimpers seem to come in a huge price range, are the sub ÂŁ30 amazon ones worth it?
I have been running a Mr Quality, no laughing at the back, one off Amazon. It comes with a few hundred various crimps.

Used daily, 10-20 times, for six moths and its still as tight as the day I bought it.

Cost >ÂŁ20. = disposable.
 
The eBay one I got direct from China has been fine. Sure, if I was working on a production line or looking at a 10+ year life for it then buying the Knipex one or RS one at x10 price makes sense, but for a couple of jobs per day that might need it - it is good enough.
 

Reply to Ferrule crimpers in the Electrical Tools and Products area at ElectriciansForums.net

News and Offers from Sponsors

  • Article
Join us at electronica 2024 in Munich! Since 1964, electronica has been the premier event for technology enthusiasts and industry professionals...
    • Like
Replies
0
Views
378
  • Sticky
  • Article
Good to know thanks, one can never have enough places to source parts from!
Replies
4
Views
952
  • Article
OFFICIAL SPONSORS These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then...
Replies
0
Views
1K

Similar threads

I use this one, copy this into a search engine: 200EP Tone Generator Kit High Accuracy Cable Toner Detector Finder Tester with Inductive...
Replies
6
Views
410
In the UK the safe current for a cable is determined by considering how it's installed, eg under insulation, or buried in a wall, or in conduit...
Replies
1
Views
375

Electricians Tools | Electrical Tools and Products

Thanks for visiting ElectriciansForums.net, we hope you find the Electricians Tools you're looking for. It's free to sign up to and post a question yourself to find a tool or tool supplier either local to you, or online. Our community of electricians and electrical engineers will do their best to find the best tool supplier for you.

We also have a Tiling Tools advice from the worlds largest Tiling community. And then the Plumbers Forums with Plumbers Tools Advice.

Search Electricans Forums by Tags

OFFICIAL SPONSORS

Electrical Goods - Electrical Tools - Brand Names Electrician Courses Green Electrical Goods PCB Way Electrical Goods - Electrical Tools - Brand Names Pushfit Wire Connectors Electric Underfloor Heating Electrician Courses
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc

YOUR Unread Posts

This website was designed, optimised and is hosted by untold.media Operating under the name Untold Media since 2001.
Back
Top