Fire alarm help

[Welshsparky]

Hi

Can anyone tell me if you can put sounders and breakglasses on the same circuit on a 4 zone primeline panel?

 

[cagedanimal2010]

from what i know about f.a.p sounders are on one circuit and callpoints and smokes/heats are on another!
hope this helps

 

[Guest123]

The fact it's a "zoned" panel suggests it may be a conventional type panel where call points and detectors are seperatetly wired to sounder circuits.

 

[Welshsparky]

Ah so basically by putting sounders on the same circuit as the breakglasses ive messed up? Im an apprentice by the way

 

[cagedanimal2010]

tbh iv never used that type of system but, if ur a pup you shud have some guidance on what to do, who's signing it off?

 

[Guest123]

Do you have any literature with the panel....is it a 2 wire system?? these are similar to the addressable loop systems only all devices are wired in a radial fashion on the same circuit and split into zones.

 

[alarm man]

the sounders have there own circuit,you can put bg's and detectors on the same circuit,as lenny says unless its a 2 wire panel.might be cheaper to change the panel than to change the wiring,depends how big the job is..