Flat wood bit stuck in impact driver

[JM ELECTRICAL]

i have a flat wood but stuck in my makita impact drill any ideas to try get it out i have tried everything i can think of

 

[rsgaz]

Any good? He has a sheared off bit stuck in there...

 

[Deleted member 26818]

I would squirt WD40 down the chuck, clamp the bit in a vice, then keep tugging till it comes out.

 

[KEV 1 N]

A wood bit in an impact driver!

 

[Strima]

Wood bit in a vice, reverse the driver and hope for the best...

And why would you use a wood bit in an impact driver?

 

[Deleted member 26818]

A lot of these spade bits fit impact drivers.
I think some are even designed to be used in them?

 

[Andy78]

Throw the whole thing away to remind you to use the right drill

 

[SparkyChick]

A couple of pairs of pipe grips... one on the bit holder, one on the bit and try to turn the bit in the opposite direction to that in which it was last used.

 

[Dave OCD]

Anyone ever had a long SDS bit totally jammed in a stone/granite type wall - and abandoned it ??

 

[Deleted member 26818]

Anyone ever had a long SDS bit totally jammed in a stone/granite type wall - and abandoned it ??

Sort of.
Guy I was working with tried to drill through a bank vault wall and got the bit caught up in the mesh.
Had to cut off the bit with an angle grinder and start a anew.

 

[SparkySy]

Sort of here as well!
I got a 20mm sds bit stuck in a stone wall of a house tried the usual tricks and it wouldn't come out sooo I borrowed a heavier drill off a mate and went and snapped the bit off about half way down it. Left half of it in the wall. It must of had a weak point in the bit and decided enough was enough!
Sy

 

[GBDamo]

Anyone ever had a long SDS bit totally jammed in a stone/granite type wall - and abandoned it ??

No but there’s a four inch core bit in a stone wall in South Wales, if any one fancies it I’ll pm the post code.

 

[Deleted member 26818]

Is it the core, or the mandrel?
Is it diamond?

 

[GBDamo]

Coincidentally, I bought a set on Armeg impact drill bits this morning and used them to fit a radiator this afternoon.

Really impressed, just having to take one tool can make a big difference with reactive maintenance jobs, especially in city centres.

 

[GBDamo]

Is it the core, or the mandrel?
Is it diamond?

Yes, no, yes.

It’s two foot inside a tithe barn wall.

Be a real find for the Time Team of the future.