Garden Fountain

[DurhamSparky]

hi chaps...


another silly question. keeping away from SWA for this job as i got some spare Metal conduit in garage,

Approx 10M lenght to a 100W pump for an outdoor fountain!!! supply from a outdoor IP65 FCU
going to use 2.5/1.5mm singles as once again i got loads of that!!! and was thinking is that ok or would you use rubber flex..???


answers on a post card!!

steve

 

[Mark.W]

Fine as long as you use that conduit.

Cheers

 

[pennywise]

Are you desperate to have a play with some conduit

 

[DurhamSparky]

i got it for a job that a landlord wanted to do at PIR time then decided he was happy with a shagged piece of plastic conduit when i made arrangements to go and do work!! just need rid of it!! was thinking of making some cable dispensers with it if all else failed!!

cheers ,

steve

 

[pennywise]

Conduit sounds like a good plan just remember the Galv paint afterwards. If it were me I'd probably wire it in Hi-tuff ,as long as the in-tire run was surface. Cheers

 

[DurhamSparky]

Hi Tuf... possibly !! going with the conduit as the whole lot will be enclosed from Start to finish!! got a nice gardener digging me the trench for free as well to bury the conduit!! nice chap