Garden power and lighting supplies

[bigspark17]

Been to see a job where a customer wants various lighting in a medium sized garden. Wall lights spot lights, decking lights, pateo lights socket along wall. Jacuzzi supply! I could wire from internal switch to outside adaptable box and take swa/hi tuff from here to lighting points and spur inside the house out to sockets via same cable method. Does any1 have any other ways they have gone about it.. Customer happy to spend so if theres a new way of doing it they wouldnt mind tge expense

 

[davesparks]

Better off with dedicated circuits to avoid the inevitable water faults taking out half of the house

 

[bigspark17]

This is my concern with all equipment outdoors.. Its a rewire also so no problem wiring dedicated ccts! Also a electric gate going in.. How much do they draw?

 

[Octopus]

If it's a rewire stick a RCBO board in , then you can have the best foundations for the electrics.

re the gates, just ask the gate people

 

[bigspark17]

Yes ill most definatly be putting rcbos in.. Im firm beliver faults on a circuit should not affect other circuits as see so often now on the dual rcd db's. Think this should be regs tbh! I would ask gate people if there were gate people around its just put a cable in time lol