Gas cooker supply

[tears200]

Hello everyone i have a quick question, i have just run a new ring main in for the downstairs of my house. The only thing is i forgot about the gas cooker needing a supply for the lights and fan. Am i able to just spur of the nearest socket for this. I only need a single socket. Any advice would be great thank you.

 

[Deleted member 9648]

Yep.....if it's all gas the load is tiny,no probs....Must be notified tho'.

 

[tears200]

Thanks mate. Cheers.

 

[eddielarge]

Be careful some of the fan assisted ovens are now rated at 20amps

 

[tears200]

20 amps god its only a light and a little fan, i will read the spec on the belling 1 meter gas cooker but if that was the case would i have to go all the way back to the board, that would be a pain because everything is plastered and tiled.

 

[eddielarge]

20 amps god its only a light and a little fan, i will read the spec on the belling 1 meter gas cooker but if that was the case would i have to go all the way back to the board, that would be a pain because everything is plastered and tiled.

Check the cable from the cooker you will soon tell

 

[tears200]

Yeah your right, thank you.

 

[tears200]

Nah im fine its only 3 amps, thank god for that i will just spur off the socket. Thanks for everyones advice.

 

[eddielarge]

Nah im fine its only 3 amps, thank god for that i will just spur off the socket. Thanks for everyones advice.

Glad to hear it.

 

[High Tower]

Polish style, 4 plate it off the ceiling Rose and duck tape it to plaster he he he