Help with Programming SELTI panel for GSM automated gates?

rick.oshea · May 16, 2011

Does anyone have any experience of SELTI door entry / gate entry control panels? Seems to be an Italian company who was taken over but can't find out by who?

I need to re-programme the telephone numbers in one. I've got a set of instructions to change the keycode but not the call button programming which dial the resident's mobiles, (so they can let people through the gate remotely)..... original people have moved on and its still dialing their mobiles!

Apparently when the original panel was ordered/installed, it came with the mobile numbers pre-programmed into it (these were supplied to dealer before being sent out to site)
Its a SELTI Edizone 2001 with number keypad & 4 push buttons to dial mobiles through a separate GSM dialer..... all plugged into a CAME control panel.

Any help would be greatly appreciated,

Graham

rick.oshea · May 16, 2011

Anyone ever come across these?
Or know of anyone who might have?

Cheers

rick.oshea · May 20, 2011

No-one?? Guess I'm gonna have to buy a videx!

If anyone has ever come across them or have an inkling of how to change the info, let us know,

Cheers

Alban Gates · Aug 6, 2011

Hi Rick
can you let me know where you got that instruction for code change please, as im also looking for all the above info, but i have not managed to get the code reset info as yet.

cheers

rick.oshea · Aug 9, 2011

Alban Gates said:
Hi Rick
can you let me know where you got that instruction for code change please, as im also looking for all the above info, but i have not managed to get the code reset info as yet.

cheers

Alban G,

Got to the bottom of reprogramming telephone numbers - its done via a laptop & software - there is a connection inside the main intercom panel labelled PC - need a specific lead & software that apparently would have come in the box from new!

To reprog a code, email me or PM me your email address and I'll send it over to you,

cheers Graham