I have a 200 amp stinger isolator and a 200 amp alternator what wire size would I use can I get away with 6 to 8 AWG and what size inline fuse would I use I was thinking 225 amp
-
Please checkout our new DIY Forum, and any trade that'd like to join and help out, and Contractor Talk Forum.
- Thread starter doggydog65
- Start date
- Replies 1
- Views 844
-
- Tags
- how to
Discuss HI new to forum doing my own work on my RV dc to dc charger how to hook it up in the The Welcome Forum area at ElectriciansForums.net
1 to 2 awg depending on the distance.
2 is rated to about 240A
1 is about 300A
volt drop will be your issue if going more than 4ft then I would go for the larger cable.
2 is rated to about 240A
1 is about 300A
volt drop will be your issue if going more than 4ft then I would go for the larger cable.
Reply to HI new to forum doing my own work on my RV dc to dc charger how to hook it up in the The Welcome Forum area at ElectriciansForums.net
Similar Threads
I may have posted this before but not sure if it made it in.
I want to install an EV Charger in my garage. The panel is two stories up and the...
- PetesEV
- DIY Electrical Advice
- 0
- 690
- Question
Hi There
How did you get on with your basement project?
- fordluver4x4
- USA Electrical Forum
- 1
- 970
Good one . Thanks. I was finding Fluke etc £££!
- Drew23
- Electrical Engineering Chat
- 5
- 2K
- Question
Hey Brianmooore,
Thanks for the response. That is sad, that isn't enough power to cool down the coils. I need way more CFM that what a cpu fan...
- Thecreamist
- UK Electrical Forum
- 4
- 1K
Need to crack on to get most from this year :cool:
BTW if you are thinking about adding to the strings later, i.e. add more panels to existing...
- James
- Solar PV Forum | Solar Panels Forum
- 6
- 770
OFFICIAL SPONSORS
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc
YOUR Unread Posts
-
External halogen light wired directly to hallway light circuit - No isolater / switchMost floodlights have been put up as a replacement for an existing light, so I’m surprised...- Latest: littlespark
-
Would you use an old CU to extend cables.Like the idea of hinging the ply. It was in the back of my mind that if there is a fault back...
- Latest: MJS_84
-
375kw squirrel cage 415v motor starting issuesstart-up torque should be about 1/3 of the rated motor torque in delta.
- Latest: James
This website was designed, optimised and is hosted by untold.media Operating under the name Untold Media since 2001.