High level cabling with long life span

[Doomed]

Replacing some lights on top of front elevation of really tall building, once in 25 years scaffolding job.
At present in MI, but due to roof works this will have to be stripped out.
The new lights are going to be 100W LED units.
The new roofing structure has ducting approx the size of MT3 built in to it and openings are to be made where the lights have to go.
What cable would you use?
Note: this is a marine enviroment
Note 2: I got to the top of the scaffolding and had to wimp out, much to the amusment of my work mates.

 

[freddo]

What's wrong with the existing MI?

 

[Chris1234]

Is that Weymuff?

 

[Doomed]

What's wrong with the existing MI?

It has to be stripped for the new roof

 

[Doomed]

Is that Weymuff?

Yes

 

[drzsta]

It would be a shame to rip out M.I. to only then replace it with an inferior cable.

 

[Doomed]

And now we find out we have to wire a DMX cable to all the lights as well

 

[suffolkspark]

Do dmx plugs like satly sea air?

 

[Doomed]

From the picture I was shown unit is pre-wired so I can take the wires into an adaptable box and make them off there. (Well, one of the others can, I'm not going!)