Hot Element Wiring in Oven | on ElectriciansForums

Discuss Hot Element Wiring in Oven in the Electrical Appliances Forum area at ElectriciansForums.net

MubasoM1

DIY
Joined
Feb 21, 2020
Messages
2
Reaction score
0
Location
Sydney
Hi. How to wire the hot element in a fan forced Westinghouse POL662W oven. The one at the back not top. A photo would be great . There are 2 connections on top and one below on each side. I attached a photo of current wiring which started a short circuit. Thanks a lot
 

Attachments

  • [ElectriciansForums.net] Hot Element Wiring in Oven
    Oven Hot Element.jpg
    159.5 KB · Views: 11
looks like it's a case of cleaning the terminals and fitting new spade connectors. not sure about the white wire on the right hand terminal.element needs to be tested for continuity and earth leakage.
 
You have connected the earth wire to the element and the live wire to the earth terminal of the element!!
[ElectriciansForums.net] Hot Element Wiring in Oven
Swap the wires circled, but note that by miswiring the element you may have damaged the thermostat and or oven timer.
 
You have connected the earth wire to the element and the live wire to the earth terminal of the element!!
View attachment 56003
Swap the wires circled, but note that by miswiring the element you may have damaged the thermostat and or oven timer.
Thanks a lot Freddo. It is exactly what you said. Thanks God no damage was done. It is working. What freeks me out is that theelement needs to be replaced every year. Maybe we are heavy users.
All over the internet there is only one photo on this so this reply will benefit many.
[automerge]1582754330[/automerge]
looks like it's a case of cleaning the terminals and fitting new spade connectors. not sure about the white wire on the right hand terminal.element needs to be tested for continuity and earth leakage.
Thanks a lot telectrix
It was wrong wiring
 

Reply to Hot Element Wiring in Oven in the Electrical Appliances Forum area at ElectriciansForums.net

News and Offers from Sponsors

  • Article
Join us at electronica 2024 in Munich! Since 1964, electronica has been the premier event for technology enthusiasts and industry professionals...
    • Like
Replies
0
Views
372
  • Sticky
  • Article
Good to know thanks, one can never have enough places to source parts from!
Replies
4
Views
938
  • Article
OFFICIAL SPONSORS These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then...
Replies
0
Views
1K

Similar threads

Oh I see. I will check that one as well. Thank you!
Replies
5
Views
304
Check the clearance between the back panel and/or terminal cover that you've removed. Look for small burn marks.
Replies
3
Views
495

OFFICIAL SPONSORS

Electrical Goods - Electrical Tools - Brand Names Electrician Courses Green Electrical Goods PCB Way Electrical Goods - Electrical Tools - Brand Names Pushfit Wire Connectors Electric Underfloor Heating Electrician Courses
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc

YOUR Unread Posts

This website was designed, optimised and is hosted by untold.media Operating under the name Untold Media since 2001.
Back
Top