Immersun used with heater

[SeanB]

Hi all,

just a quick one just wondering what is a good efficient storage or day heater that can be connected directly to my immersun 2 just as the hot water is. Even with all this dull weather I am still sending loads of spare kW s back to the grid and would prefer to use them to take the chill off the upstairs as it's free.

i know some would say it's not worth it but it's just I would like to use every last bit so the heater must be able to work with the fluctuating power just like the hot water tank element does

thanks for your responses

 

[Worcester]

We've installed loads with Dimplex Flat Plates:
Low wattage panel heater from Dimplex, official site
INSTALLED HEATING - PANEL HEATERS
Go for the simplest ones, no timers, no electronic controls
http://www.amazon.co.uk/gp/product/B00011FW4W/ref=oh_details_o01_s00_i00?ie=UTF8&psc=1
and also used these:
http://www.amazon.co.uk/gp/product/B000C3MLRU/ref=oh_details_o00_s00_i00?ie=UTF8&psc=1

Not yet used it with a storage heater, though once again go for the ones with the simplest controls.

 

[SeanB]

Thanks those dimplex ones look good.

Everywhere I looked seemed to come up with digital displays especially the storage heater ones

 

[JulianC]

I use one of these 400W flat panel heaters:

400w Slim Heat Pro 600mm x 600mm


and an Elnur 1.8kW manual storage heater

 

[SeanB]

I might actually pick up an elnur 1.7kw doesn't look too bad thxs