Just got into college | on ElectriciansForums

Discuss Just got into college in the Electrical Tools and Products area at ElectriciansForums.net

M

Millwalljoe

Hi
This is my first post and I'm very happy I just got into a 3 year college course to be a electrician, I want to start off doing domestic and move onto industrial. :)

I want to buy my own tools for college and was wondering if someone could help me with what I would need.

Things I own:-

Ck tools automatic wire stripper (amazing)
Ck tools sabertooth saw (won that)
Draper 7 price vdk screwdriver set
Makita combined drill
Makita impact driver

I aim to buy a new tool every fortnight, I only have ÂŁ20 every fortnight now due to other costs but I want to keep most of it ck tools or draper.

I have a CEF, Tool-Station, screwfix and a independent electrical tool shop local who I can buy from, :) please post what I need to buy down below thanks.
 
Last edited by a moderator:
Things you will want

Side Cutters
Pliers
Long nose pliers
Utility Knife or electricians knife
Ratchet crimping tool
Hacksaw
Junior hacksaw
Claw hammer
Lump hammer
Bolster set
Cold chisel set
Wood chisel set
Drill bit set (Wood, Masonry and Hss)
Small adjustable spanner
Hex key set

If you want to do industrial

Spanner set
Socket and ratchet set
Angle grinder

This is everything I can think of off the top of my head. For hand tools I recommend Knipex or Bahco.
 
oops lol i was suppose to write toolstation but correction must of put that aha
whils im at it can anybody give me a run down on different vde screwdriver sets
like i see some ck tools ones for ÂŁ20 and some for ÂŁ50
whats the difference and if possible could someone link me to a good set
thanks again joe
 
Welcome to the Forum Millwalljoe. :) - I have corrected your thread starter for you regarding mentioned spelling mishap + punctuation, if you can please use basic punctuation, comma's, full stops etc as it makes for easier reading with less confusion. ;)
 
Last edited by a moderator:
for VDE drivers, buy irazola, (rebranded as bahco). ÂŁ25 a set. and for snips, buy CK or similar with the 2 strip notches for 1.5mm and 2.5mm.
 
Last edited:
i have just gone out and bought a set of draper expert VDE screwdriver set
when i went down to my local shop i was offered a set of a set of bahco , but turned them down because they just did not seem comfy unlike the draper expert.
 
I think the best thing is to buy Tools when they are at a GOOD PRICE at a TIME when you have the MONEY for it.

Keep the Money till you see a GOOD DEAL and then buy, you can wait for the item but they cant wait to keep hold of a item and have to reduce it at some point
 
Welcome to forum.

Seriously I would think twice about taking your own tools to college as
1- Some one may try to appropriate them
2- Some one borrows them and mistreats them
 
I think the best thing is to buy Tools when they are at a GOOD PRICE at a TIME when you have the MONEY for it.

Keep the Money till you see a GOOD DEAL and then buy, you can wait for the item but they cant wait to keep hold of a item and have to reduce it at some point
thats true that is, i got a copy of finale for ÂŁ15 a couple years ago^^

its similar to Sibelius but not as expensive
 
I want my own tools because it will keep me focused because if I invested money in tools it will keep me motivated if that makes sense and iv burned my name in all my tools for saftey plus I won't lend them out
Also lastly I have checked out the books and I can buy 3 books needed 2nd hand for only ÂŁ50
 
You won't need a drill at college, maybe just take sidecutters and a terminal driver..also take a pad of paper, coloured pens and a copy of the on-site guide would be useful
 
Last edited:
What are peoples opinions on forge steel tools? Compared to knipex and ck tools they are so much cheaper
Are they worth buying just for college and upgrade later on?
 

Reply to Just got into college in the Electrical Tools and Products area at ElectriciansForums.net

News and Offers from Sponsors

  • Article
Join us at electronica 2024 in Munich! Since 1964, electronica has been the premier event for technology enthusiasts and industry professionals...
    • Like
Replies
0
Views
412
  • Sticky
  • Article
Good to know thanks, one can never have enough places to source parts from!
Replies
4
Views
1K
  • Article
OFFICIAL SPONSORS These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then...
Replies
0
Views
1K

Similar threads

I would say it is more about the bits than the torque of the drill. I use high quality Fisch auger bits for drilling out mortices and peg holes...
    • Like
2
Replies
29
Views
3K

Electricians Tools | Electrical Tools and Products

Thanks for visiting ElectriciansForums.net, we hope you find the Electricians Tools you're looking for. It's free to sign up to and post a question yourself to find a tool or tool supplier either local to you, or online. Our community of electricians and electrical engineers will do their best to find the best tool supplier for you.

We also have a Tiling Tools advice from the worlds largest Tiling community. And then the Plumbers Forums with Plumbers Tools Advice.

Search Electricans Forums by Tags

OFFICIAL SPONSORS

Electrical Goods - Electrical Tools - Brand Names Electrician Courses Green Electrical Goods PCB Way Electrical Goods - Electrical Tools - Brand Names Pushfit Wire Connectors Electric Underfloor Heating Electrician Courses
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc

YOUR Unread Posts

This website was designed, optimised and is hosted by untold.media Operating under the name Untold Media since 2001.
Back
Top