LED mirror lighting from socket?

[SJG90]

Hi Guys

I have a selection of LED mirrors to wire in (not in a bathroom). There are sockets in a ring conveniently located near the locations (the lighting circuit isn't easily accessible), while excessive, can I spur 2.5 T&E from the socket into the LED block or will this have to go via a fused unit? If this is the case will I have to spur from each socket into a fused unit then onto each light separately or can I link them?

 

[MJPD29]

You will most likely need an FCU with a fuse rated to manufacturers instructions. Alternatively, if it is in a showroom or something similar they could be wired into a plug with a suitably rated fuse if they are going to be changed often.