Lighting Timer Unit.

[new_spark]

Hi

Customer has a shop, front sign of which is currently lit by 5 individual 100w GLS lamps.

Wants a photocell sensor for dusk/dawn control but also controlling that a timer unit so that he can set the lights to turn off after 2am every night.

The lights are fed on 1.5 T&E from a Type B 6amp Mcb on a 17th Board with RCD protection.

Does anyone know of a timer unit that will be suitable??

Thanks

 

[spud1]

Yeah just a mechanical immersion heater will do the job. Could be mounted next to DB and wire supply to lights through it, then through photocell outside and finally to lights.

 

[Spudnik]

Watch out for some electronic times, especially if there is/will be LE lamps or lighting involved.

Whilst they state they can handle the load, some cant and weld the contacts on start up.

Should be fine with a mechanical one though.

 

[telectrix]

agreed mechanical immersion htr timer, seies with photocell

 

[new_spark]

Watch out for some electronic times, especially if there is/will be LE lamps or lighting involved.

Whilst they state they can handle the load, some cant and weld the contacts on start up.

Should be fine with a mechanical one though.

Thanks for that, not fitted one before and having seen some of the electronic ones I thought the max loads at 400W was a very low.

Cheers

 

[i=p/u]

im doing one meself at the moment with 3 x 150W metal halide fittings, and was wondering isit just a central heating time clock you used

 

[telectrix]

use a mechanical immersion heater timer. rated 3kW. b&q £15

 

[lamb]

For a proper job I would use a sangamo timeswitch and a NEMA socket photocell kit in series, connected via an auto/off/override switch. Then you have a resilient installation that is easily maintained.

 

[i=p/u]

there is override switch on immersion heater timers aint there????

 

[lamb]

There is also an override switch on sangamo time clocks. Its just nice to be able to manually bypass all controls for maintenance.

 

[i=p/u]

i said , photocell to control lighting, and he said time clock. so double dp fuesd spur to time clock then to lights

 

[i=p/u]

it aint easy lamb..