Line connector

[surreysparks]

We carry out A LOT of testing, and I was wondering if there was a line or wago connector that you can get the probes into, to make r1 and r2 testing faster, just have 2 x 2 pole connectors and a quick probing

 

[John21]

I think most of them have integrated test points on the connectors. If you go on YouTube and type in wago and it comes up with a demo video. Hope this helps.

 

[FAA Greenie]

I use the 3 way clamp connectors to do dead testing, R1 R2 easy, just add a bit of 2.5 to the spare clamp to connect the tester to and you are away. Make cross connections on ring main R1 R2 much quicker too.

 

[Jabbajaws]

KEWTECH make r1+r2 adaptors for the lighting side of things, if thats what youre after. Theyre very handy in my opinion if youre prepared to shell out the wonga. Check out Test Meters, Electrical Testing Equipment & Measurement Instruments as they do them....

 

[Richard Burns]

To get into the test points on wago /line connectors you need a fine needle probe (or a bit of 1mm clamped in a croc clip!)


- - - Updated - - -

that picture was bigger than I thought!

 

[surreysparks]

That's what I needed to know