Hello. I have a Litecom CCD controller installed. When logging into the web interface at its ip address, it asks for a password, the password is lost. There was an attempt to reset the controller by pressing the Function button for 30 seconds, but the password still remained. There are no suitable instructions, except for the instructions for installing the controller, which mentions resetting using the Function button. If someone has worked with Litecom controllers? Is it possible to reset the controller to factory settings in order to get a new password?
Discuss Litecom CCD in the Electricians Software | Electricians Downloads area at ElectriciansForums.net
Reply to Litecom CCD in the Electricians Software | Electricians Downloads area at ElectriciansForums.net
Similar threads
I don't think I'd use it mate even the one line heading then one long paragraph screams ai. And untrustworthy. I don't think much has been edited...
OFFICIAL SPONSORS
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc
YOUR Unread Posts
-
-
Song words.I used the original Sarstedt version #384 on 23rd September….. but this is a different artist…...- Latest: littlespark
-
Zanussi electrical oven started tripping the RCDOh I see. I will check that one as well. Thank you!- Latest: DoItMyself
This website was designed, optimised and is hosted by untold.media Operating under the name Untold Media since 2001.