measuring equipment | on ElectriciansForums

Discuss measuring equipment in the Solar PV Forum | Solar Panels Forum area at ElectriciansForums.net

C

Cider

Hi

I need to invest in an electronic measuring device to measure roofs etc from the ground.

Any recomendations for a good lazer tape or similar?

Many thanks
 
Hi

We use Lecia Disto 8, its great for 100% accurate roof survey! pin point accuracy to measure flue's and other obstructions, plus can measure height of trees for detailed shading.

Matt
 
At the lower end of the cost-scale to the Disto (great units though), you could use one of our Laser Levels with built in relative/absolute digital inclinometer. The level itself is 600mm long.
 
Hi

We use Lecia Disto 8, its great for 100% accurate roof survey! pin point accuracy to measure flue's and other obstructions, plus can measure height of trees for detailed shading.

Matt

How does it measure trees, where do you have to be, under the tree and point it at the top? or viewing the tree from maybe a distance

thanks
 
I see the Disto D8 has the option, as mentioned above, to calculate the height off tree's for example from a distance.
We were initially looking towards the D5 as it was recommended to us but can the D5 also perform the same calculation or is this an added benefit to the D8?
 
No problem, make sure you get a tripod, in fact I got a tip, if you can get to a trade show were lecia are exhibiting you will get a better deal for buying on the day.
 

Reply to measuring equipment in the Solar PV Forum | Solar Panels Forum area at ElectriciansForums.net

News and Offers from Sponsors

  • Article
Join us at electronica 2024 in Munich! Since 1964, electronica has been the premier event for technology enthusiasts and industry professionals...
    • Like
Replies
0
Views
351
  • Sticky
  • Article
Good to know thanks, one can never have enough places to source parts from!
Replies
4
Views
898
  • Article
OFFICIAL SPONSORS These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then...
Replies
0
Views
1K

Similar threads

I have a question i hope someone can just give me a little clarification on . When carrying out preliminary cable design for a given circuit we...
Replies
0
Views
260
Hi all Usually I work at office or central headquarters, but sometimes I have to get on my job pants and test some Megger or show trainees or...
Replies
0
Views
349

OFFICIAL SPONSORS

Electrical Goods - Electrical Tools - Brand Names Electrician Courses Green Electrical Goods PCB Way Electrical Goods - Electrical Tools - Brand Names Pushfit Wire Connectors Electric Underfloor Heating Electrician Courses
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc

YOUR Unread Posts

This website was designed, optimised and is hosted by untold.media Operating under the name Untold Media since 2001.
Back
Top