Loop impedance testing
It is now possible to perform a fast two- wire High Current loop test(Hi) or a two- wire Low Current loop test (Lo) when in the L -PE mode without changing test lead connections.
With the MFT in the L - PE mode, the display will show the Lo symbol, indicating a low current loop test.
Press the function key <-> to change to Hi mode
Current firmware V1.09 on the MFT1720 & MFT1730
It is now possible to perform a fast two- wire High Current loop test(Hi) or a two- wire Low Current loop test (Lo) when in the L -PE mode without changing test lead connections.
With the MFT in the L - PE mode, the display will show the Lo symbol, indicating a low current loop test.
Press the function key <-> to change to Hi mode
Current firmware V1.09 on the MFT1720 & MFT1730
