meter tail crimpers

[gdr7671]

Anyone know where crimpers for meters can be purchased? I would be very happy to know as i have lost mine. Thanks in anticipation.

 

[Midwest]

To crimp what exactly?

 

[telectrix]

seals???

 

[Midwest]

Sorry telectrix, don’t wish to sound facetious but there are various threads about cutting seals (which I assume you are doing), you would of course be crimping a temporay seal, and informing the DNO?

 

[telectrix]

Sorry telectrix, don’t wish to sound facetious but there are various threads about cutting seals (which I assume you are doing), you would of course be crimping a temporay seal, and informing the DNO?

what i meant was that the OP didn't say what he wanted to crimp. did he mean crimp ferrules on the tails, or crimp new seals?

 

[Guest111]

We have covered this issue time and time again,may I remind everyone that seals are not there for your amusement,indeed interfering with them may lead to a criminal prosecution with a fine of £1000 or up to five years imprisonment.This is due to the fact that certain types are protected under C I T E S along with other creatures such as the barn owl.please dont try to crimp anything to them as they will not like it.:joker:Sorry chaps couldn,t resist.

 

[Midwest]

Sorry again telectrix, got me 'posters' mixed up!

 

[gdr7671]

We have covered this issue time and time again,may I remind everyone that seals are not there for your amusement,indeed interfering with them may lead to a criminal prosecution with a fine of £1000 or up to five years imprisonment.This is due to the fact that certain types are protected under C I T E S along with other creatures such as the barn owl.please dont try to crimp anything to them as they will not like it.:joker:Sorry chaps couldn,t resist.

Everyone has got this wrong (my fault). I mean't larger than normal crimpers. EG 16-mm-50-mm. For incoming cables from meter.Not hydraulic crimpers- 240-mm-300-mm. Sorry chaps.

 

[D Skelton]

6.0mm - 25mm Ratchet Crimp Tool

and

10.0mm - 120mm Heavy Duty Crimp Tool

I have both and they both work fine!

Enjoy

 

[Guest111]

I got a nice hydraulic one off ebay for about 45 quid goes from 16mm to 120mm

 

[Geordie Spark]

I got a nice hydraulic one off ebay for about 45 quid goes from 16mm to 120mm

Q. What's the difference between a JCB and a giraffe ??

A Well, one has hydraulics ... :joker:


OK ... I'm off now to t'other place ... :lipsrsealed2: