moving an ev charger | on ElectriciansForums

Discuss moving an ev charger in the UK Electrical Forum area at ElectriciansForums.net

Joined
Aug 9, 2012
Messages
77
Reaction score
14
my son has recently had an ev charger installed for his car (last week) cost was ÂŁ900, simple run ,consumer unit on outside wall ,drill through to garage and armour cable run of 3 metres to the charging point.Not disputing the cost as hopefully they have provided the relevant certs etc.

now that his wife has seen where it is she wants it moved to the other side of the garage, again simple high level surface run and out through the garage wall to the new position. approx 3 metres away The company want ÂŁ350 to do this.....

My question is do we get them back or can I move it for him ?

former electrician,retired public sector,as an electrician I worked in industrial,domestic installations and maintenance

any thoughts,
 
I don’t know if the warranty would be affected?
All they know is X unit fitted at Y address.

As long as the original installers didn’t take photos, and you don’t make a dogs dinner of it.
 
I don’t know if the warranty would be affected?
All they know is X unit fitted at Y address.

As long as the original installers didn’t take photos, and you don’t make a dogs dinner of it.

The above might possibly be feasible, if inadvisable, should the contract be between customer and manufacturer.

If the contract is between customer and installer, I'd be fairly certain they'd know exactly where it was installed and any claim may well be rejected on the basis that the installation had been altered.

Electricians assume liability for circuits on which they've worked, this liability would pass to anyone who subsequently alters that circuit. As for the charge point, alteration of circuit wouldn't necessarily affect its warranty, but any evidence of issues surrounding terminations would give solid grounds on which to reject a claim - some charge points require a very low torque at terminations, with less than substantial connection of terminals to circuit board.

In short, while the OP is free to make their own decision on this matter, I'd urge caution for reasons stated above.
 
I presume the cable will need joining , so they will know as extra glands and wiska/ adaptable box will not be on the invoice,it would all need testing again after the work.
a 320 mile journey may cost almost as much these days!
 
Thanks for all the replies,
still thinking about it,one thought I had was that its difficult to buy 3 metres of armour cable the shortest length I have seen is 10M so I would be as well removing the original cable and running in the new one thus doing away with any junction boxes..
 
Thanks for all the replies,
still thinking about it,one thought I had was that its difficult to buy 3 metres of armour cable the shortest length I have seen is 10M so I would be as well removing the original cable and running in the new one thus doing away with any junction boxes..

Do you have the necessary test equipment to test the install when complete?
 
I would crack on and move it you probably have more experience than the guys who fitted it as long as do a cert for the new cable the car charger should all ready been pat tested so to speak all you are required to do is test your new supply
I've never yet come across PAT Testing of an EVSE.
 

Reply to moving an ev charger in the UK Electrical Forum area at ElectriciansForums.net

News and Offers from Sponsors

  • Article
Join us at electronica 2024 in Munich! Since 1964, electronica has been the premier event for technology enthusiasts and industry professionals...
    • Like
Replies
0
Views
378
  • Sticky
  • Article
Good to know thanks, one can never have enough places to source parts from!
Replies
4
Views
947
  • Article
OFFICIAL SPONSORS These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then...
Replies
0
Views
1K

Similar threads

A day for sure. I recently installed an Anderson with dedicated CU. The run was a fair bit worse as I had to drop a section of ceiling and chop...
Replies
13
Views
701
Thank you everyone for your comments Celia
Replies
6
Views
695

OFFICIAL SPONSORS

Electrical Goods - Electrical Tools - Brand Names Electrician Courses Green Electrical Goods PCB Way Electrical Goods - Electrical Tools - Brand Names Pushfit Wire Connectors Electric Underfloor Heating Electrician Courses
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc

YOUR Unread Posts

This website was designed, optimised and is hosted by untold.media Operating under the name Untold Media since 2001.
Back
Top