Hi all,
I am after any wiring gurus who also know there way around relays etc.
This is what I am trying to do.
I have a 2 speed wiper motor in my vehicle. I am wanting to run a wiper stalk with the wipers.
I can get everything to work except for it to self park.
Now this is where I need some help. How the self park mechanism works as far as I know is that when the wiper stalk is turned to the off position what happens is the park wire on the stalk goes live which then allows the park mechanism to activate at park the wires. I don't think the wiper stalk as a wire for park, so I would most likely need a wire from a relay to go live when the stalk has been switched off.
I don know how to get the park wire to go live when the stalk is moved to the off position.
Now for some diagrams
This is the wiring diagram for the the stalk. There is only 3 wires that I do not have connected - one is a wire for a wagon (which I don't need) and the other is a green wire (which I am led to believe goes to an intermittent wiper relay)? and a white and blue wire.
Any thought how I can make a wire on this switch go live when it is turned off (even if the wire is coming from a relay??
Thanks
Jason
I am after any wiring gurus who also know there way around relays etc.
This is what I am trying to do.
I have a 2 speed wiper motor in my vehicle. I am wanting to run a wiper stalk with the wipers.
I can get everything to work except for it to self park.
Now this is where I need some help. How the self park mechanism works as far as I know is that when the wiper stalk is turned to the off position what happens is the park wire on the stalk goes live which then allows the park mechanism to activate at park the wires. I don't think the wiper stalk as a wire for park, so I would most likely need a wire from a relay to go live when the stalk has been switched off.
I don know how to get the park wire to go live when the stalk is moved to the off position.
Now for some diagrams
This is the wiring diagram for the the stalk. There is only 3 wires that I do not have connected - one is a wire for a wagon (which I don't need) and the other is a green wire (which I am led to believe goes to an intermittent wiper relay)? and a white and blue wire.
Any thought how I can make a wire on this switch go live when it is turned off (even if the wire is coming from a relay??
Thanks
Jason