Newbie: Advice needed: Competent Person Assessment

[kdc1870]

Hello all,

Apologies if this is not the right section to post this, but I'm after any help/advice I can get about my upcoming Elesca Competent Person Assessment.


I'm fairly newly qualified, but am a bit rusty as straight from qualifying, I got a job surveying that didn't really require my electrical qualifications.

My job's changed and the company I work for has asked me to be their registered competent person and booked me in for an assessment through Elesca.

I not gone through a competent persons assessment before, so am totally unaware of what's going to be in it.

Obviously I'm aware that in order to be a Spark, we'll all do these regularly for whichever scheme your with. However, I also know that each scheme does the assessment in their own way.

What would really help is any generic advice about preparing & going through an assessment, plus any specific advice as to what Elesca do and what they like to see.

Any and all advice, very much appreciated.

Kev

 

[trev]

Mate there are thousands of threads on this very subject all over the forum, have a dig and I'm sure you'll find what you're looking for. You could also contact Elecsa direct as they will know the answers to your questions better than anyone.
Good luck with the assessment

 

[MarkieSparkie]

Hi kdc, welcome to the forum.

 

[kdc1870]

Cheers Trev, Markie.