NVQ 3 Witness Statements

[piperm]

I've done all my log book now apart from 2 witness statements and sgetting it all signed

The struggle is with the witness statements.I need 1 for unit 303 and 1 for unit 308

I've been told i need to write a sentance or 2 on the top of each statement before getting them signed by my WBR and Gaffer. The only problem is im not sure on what to write on the statements, Ive thought of a few things im just wondering if all you wonderful people could let me know what to put down.

Firstly on the 303 i was thinking:

I, Matt have collected all Information of installed materials to hand over to the appropriate supervisors and foreman ready to be handed to customer at end of the job.

and on 308 i was thinking:

I, Matt have done all necissary inspecting and required testing on all newly installed circuits as detailed on job spec

Tests completed were, Continuity of C.P.C, Insulation Resistance, Polirity And Earth loop Impedance (Ze & Zs).



Would these be accepted by the assesor or would i need to write more?? if so then do any of you know anything else i could add to help it get through?

Cheers

Matt

Anyone?? =( 23 people visited my thread and not a single response..? surely someone else has been in the same position as i am at the min

 

[zupos40]

I've done all my log book now apart from 2 witness statements and sgetting it all signed

The struggle is with the witness statements.I need 1 for unit 303 and 1 for unit 308

I've been told i need to write a sentance or 2 on the top of each statement before getting them signed by my WBR and Gaffer. The only problem is im not sure on what to write on the statements, Ive thought of a few things im just wondering if all you wonderful people could let me know what to put down.

Firstly on the 303 i was thinking:

I, Matt have collected all Information of installed materials to hand over to the appropriate supervisors and foreman ready to be handed to customer at end of the job.

and on 308 i was thinking:

I, Matt have done all necissary inspecting and required testing on all newly installed circuits as detailed on job spec

Tests completed were, Continuity of C.P.C, Insulation Resistance, Polirity And Earth loop Impedance (Ze & Zs).



Would these be accepted by the assesor or would i need to write more?? if so then do any of you know anything else i could add to help it get through?

Cheers

Matt

Anyone?? =( 23 people visited my thread and not a single response..? surely someone else has been in the same position as i am at the min

Personelly witeness statement should state that the person observe you performing the task and that what they observed was you work, that it was commpleted to a satifactory standard and safely.

For the witness statement for unit 308, I would include a copy of the Test schedule for the circuits you tested and get then to sign that this test schedule was produced by use and that these were the results you obtained, make sure all the information on the test sheet in accurate, hope this helps you.

 

[piperm]

ah right so if i give them my spark and let him fill them out, or i fill them out in his wording and he signs it i'll be ok?

in 308 on the 1 side i have a picture of myself and calibration certs and on the other 308 i have another pic of myself and this witness statement.

the tests were done last year so i dont have any of the certs anymore and my gaffer wont have any time to find them out so ....