Part P sign off problem | Page 2 | on ElectriciansForums

Discuss Part P sign off problem in the UK Electrical Forum area at ElectriciansForums.net

Joined
Oct 11, 2021
Messages
9
Reaction score
25
Location
Cornwall
Hi there...I'm pleased to find, hopefully, somewhere to answer a situation I find myself in. I'll try and compress the long saga...

In July 2020 I had a full rewire done on my house. Qualified electrician, tick. Registered with NECIEC (I now find out he wasn't). Competent, now I find out not part of the scheme. That's the problem.

He gave it big licks how the competency scheme was well worth it when he was showing the job, however it has transpired he either wasn't on the competent scheme nor in fact registered with NICEIC (I found this today) as he was about to move from self employed to employed.

We chased him for full sign off for over 12 months before he turned around and said its our fault for not opening an account with Building Control and getting them to sign it off when he'd finished. Obviously we argue we didn't do that because he never told us he wasn't competent scheme registered. He says he assumed we knew what we were doing and he assumed we'd gone to BC before he started, thus never mentioned the Part P sign off.

Who's at fault, us for being naive and assuming he was competent because he told us he could sign it all off, or him for not making it clear at the start we needed BC and he couldn't sign off because he wasn't on the competent register?

Thank you in advance.
 
electricity is still electricity IMO notification is another matter, we could argue then you can only test circuits and issue certs if only registered with a CPS which is not the case just stating the facts.

No, you always test the work you have done, and always issue a cert. But you only need to notify it if is notifiable.

Or have I misunderstood what you mean?
 
No, you always test the work you have done, and always issue a cert. But you only need to notify it if is notifiable.

Or have I misunderstood what you mean?
What I am trying to say is this guy has been provided an EIC from the sparky that done the rewire, notification aside, he has been given a cert with test results etc signed by him, equally he could have done some minor works and issued a MWC, are we saying you can only provide an EIC if in a CPS scheme.
 
What I am trying to say is this guy has been provided an EIC from the sparky that done the rewire, notification aside, he has been given a cert with test results etc signed by him, equally he could have done some minor works and issued a MWC, are we saying you can only provide an EIC if in a CPS scheme.

No. Anyone competent can issue an EIC.
 
Given the recent 'landmark' case where Trading Standards took an electrician to court under consumer protection regulation, I would start by speaking with them and seeing if you have any grounds in a claim.

The contract was awarded to the contractor on the belief that he was CPS registered and at no point did that contractor seek to correct that client, going off what we have above.

Step 1; get off here and get legal advise.
 
He coughed up the court fee and ÂŁ150 towards paying another sparky to sign off the job properly for BC
now the dispute is settled and the other electrician has sighed off the work ,so this how it stands the NICEIC will not let any spark with them sign off other peoples work ,NAPIT will only do third party testing .so for insurances goes if and if your house catches fire then you will need to argue with the body the spark is with. just add their
insurance will not cover you neither.
 
If the electrician has any paperwork or logo's to show he is a scheme member then he is the guilty party, this has been a bit of a bone of contention where scheme providers sell EICR forms with their logo on them to people who are not members, but I made a big mistake telling the LABC when the builder we had walked off the job.

I had assumed the builder had told the LABC so I told them I was taking over the job. And you can't untell them.

With most items the owner is responsible to ensure LABC is informed, except when the tradesman is a scheme member, be it windows or electrics there are schemes which do it for you. So be it website, van, paperwork, an electrician must not show he is a scheme member when he is not.

As to who takes who to court not sure, it may be the scheme provider takes the electrician to court if he says he is a member and is not.

I would say if the electrician has issued the EIC then he could claim he thought you had informed the LABC, he would know you needed that EIC so he would clearly have issued one. If he has not issued an EIC then he is clearly trying it on.

In Wales it costs ÂŁ100 plus vat for first ÂŁ2000 worth of work, plus any charges for third party inspectors. The latter bit was the problem for me, they wanted me to pay for the third party inspector, my son (also an electrician) was doing most of the talking, and was trying to persuade the inspector to accept our EIC pointing out we both had C&G 2391 which is the inspecting and testing exam.

Finally my son was about to give in, and said OK but clearly the person who inspects must be same or higher qualified to ourselves, and my dad has a degree, only then did the LABC inspector say he would accept my signature on the certificate.

However my son had done work in England and had his signature accepted many times before.

But the LABC inspector did want to see the test equipment, and our qualifications. So although it is down to the owner in law, unless the electrician has anything to show scheme membership, in real terms the electrician doing the work needs to convince the inspector he has the skill required, so he needs to do the registering not the owner as the LABC inspector may ask for proof he has the skill.

You have two problems, one is minor which is getting a completion certificate, the major one is if he has not issued an EIC why not, why does he not want to admit he did the wiring, what is wrong? If he has issued an EIC then I would just say nothing to the LABC not worth the hassle, but if no EIC why?

I did use LABC and did submit the EIC and get the completion certificate, but the inspector completely missed the lintel over the door of wet room was only supported on one side, lucky we did find it, and did fit new lintel, but not impressed with LABC and when mother house was to be sold, could not find the paperwork so applied for replacements, told would take 4 months, and I would need to pay the time it took the council worker to find them, i.e. open cheque.

Also when we did find the paperwork, we realised there was nothing to really show who did what, we had two compliance certificates and a completion certificate but there was no reference between the completion certificate and the EIC so bit useless anyway.
 
I may be wrong, I'm a common spark not some legal eagle

Building regs only requires (of the householder) a set standard is met

The householder can pass on the responsibility by engaging someone who can self certify

If the tradesman is not registered it remains the responsibility of the householder ( householder should check any registration for who he engages)

It would appear the only contention would be breaking the terms of a written contract between the householder and the tradesman

The BC matter to remain the householders problem
 
I may be wrong, I'm a common spark not some legal eagle

Building regs only requires (of the householder) a set standard is met

The householder can pass on the responsibility by engaging someone who can self certify

If the tradesman is not registered it remains the responsibility of the householder ( householder should check any registration for who he engages)

It would appear the only contention would be breaking the terms of a written contract between the householder and the tradesman

The BC matter to remain the householders problem
Agreed. Hence I took the sparky to court for the breach of our contract in which he led us to believe he was competent and registered and could sign off the work.
 
Agreed. Hence I took the sparky to court for the breach of our contract in which he led us to believe he was competent and registered and could sign off the work.
Sorry for your confusion
I have read your update
I gave a reply to the original question



Who's at fault, us for being naive and assuming he was competent because he told us he could sign it all off
 

Reply to Part P sign off problem in the UK Electrical Forum area at ElectriciansForums.net

News and Offers from Sponsors

  • Article
Join us at electronica 2024 in Munich! Since 1964, electronica has been the premier event for technology enthusiasts and industry professionals...
    • Like
Replies
0
Views
378
  • Sticky
  • Article
Good to know thanks, one can never have enough places to source parts from!
Replies
4
Views
951
  • Article
OFFICIAL SPONSORS These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then...
Replies
0
Views
1K

Similar threads

This situation is not uncommon and is absolutely nothing to lose sleep over. There are plenty of properties sold without the 'required' electrical...
Replies
5
Views
725
  • Question
In the mind of someone lying there wide awake at 3AM, just about anything.
    • Like
2
Replies
25
Views
3K

OFFICIAL SPONSORS

Electrical Goods - Electrical Tools - Brand Names Electrician Courses Green Electrical Goods PCB Way Electrical Goods - Electrical Tools - Brand Names Pushfit Wire Connectors Electric Underfloor Heating Electrician Courses
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc

YOUR Unread Posts

This website was designed, optimised and is hosted by untold.media Operating under the name Untold Media since 2001.
Back
Top