Polarity

[Sparky12021986]

ok question time again...

Explain why the documented results of polarity tests are not a numerical value.


i know its a tick but why????????

 

[i=p/u]

beacuse you checking that the fuses and switches are in line conductor so normally confirmed when connecting up..

 

[trev]

How could you put a numerical value on it? It's not possible mate

 

[Sparky12021986]

How could you put a numerical value on it? It's not possible mate

i know its not possible but thats what the stupid question asks...

 

[telectrix]

yep.it's either right or wrong.

 

[tony mc]

Because you are not recording the voltage but confirming that the line and neutral conductors are connected in the correct order and not reversed!

 

[mechelec]

you could use a binary count 1 or 0 but as stated already it is either correct or not correct.

 

[i=p/u]

ding dong or no ding dong

 

[telectrix]

you must be playing with your own ding-a-ling.

 

[i=p/u]

yh thinking about you with your 1.5mm hahahahahah

 

[Knobhead]

0 = No
1 = Yes

Basic logic!

 

[Sparky12021986]

0 = No
1 = Yes

Basic logic!

thats what i was thinking like with an on and off switch.. l/0

 

[telectrix]

or the indicators on my van. yes-no,yes-no,yes-no.

 

[Deleted member 26818]

It is not recorded as a numerical value, because there is no measurement required for confirmation.

 

[Knobhead]

or the indicators on my van. yes-no,yes-no,yes-no.

That’s life in general isn’t it?

View attachment 10905