Proteus 3 phase DB horizontal

[Welsh_sparky_21]

Have any of yous fitted the proteus 4 way 3 phase DB? The horizontal one. The din rail I got with it was very narrow, only the top off of the RCBO clipped onto it. Anyone else had this?

 

[pc1966]

Seen pictures of it, looked promising but - its Proteus!

I know they do both "consumer" 6kA RCBOs and "commercial" 10kA ones but never compared them or checked for compatibility lists for their boards, etc.

 

[pc1966]

Just looked and they say "Units will accept 6kA and 10kA MCBs and DIN Rail mounting HRC fuse carriers" which is promising, though checking CEF site I don't see any fuse carriers. Shame as there are times a fuse for a sub-main would be perfect!

 

[Welsh_sparky_21]

Just looked and they say "Units will accept 6kA and 10kA MCBs and DIN Rail mounting HRC fuse carriers" which is promising, though checking CEF site I don't see any fuse carriers. Shame as there are times a fuse for a sub-main would be perfect!

Not a lot of room at the top of the DB for dressing in neutrals and cpcs. Used to Hager myself, first time fitting a proteus

 

[pc1966]

Not a lot of room at the top of the DB for dressing in neutrals and cpcs. Used to Hager myself, first time fitting a proteus

It looks like Proteus is the only brand offering "Type A" single-row TPN boards. So if space limited then its your only choice!

EDIT: I think they do a 10kA "compact" RCBO as well.

 

[pc1966]

This sort of thing:

32A Single Pole 1 Module B Curve 10kA 30mA Type A Compact RCBO

Residual current circuit breaker with overload

www.cef.co.uk

 

[littlespark]

The one sided din rail makes it easy to slide out a breaker off the bus bar with the power still on…


I didn’t just say that, did I.

 

[hasel5]

Used a few of these on EV installs They are not the best but good for small spaces not had any issues as in call backs either.

 

[sinewove]

It looks like Proteus is the only brand offering "Type A" single-row TPN boards. So if space limited then its your only choice!

EDIT: I think they do a 10kA "compact" RCBO as well.

I used to make up type A boards using Hager enclosures and devices but Hager will give no warranty on home made boards even with their own parts,so w,ere stuck with Proteus..
S