Hey, I'm looking to add a quinetic switch to control a led strip for under kitchen cupboard lighting. The quinetic receiver is 6A so I'm wondering what transformer I'd need to feed the LED light strip? Many thanks in advance.
Discuss Quinetic receiver and LED strip in the UK Electrical Forum area at ElectriciansForums.net
Reply to Quinetic receiver and LED strip in the UK Electrical Forum area at ElectriciansForums.net
News and Offers from Sponsors
- Article
Join us at electronica 2024 in Munich! Since 1964, electronica has been the premier event for technology enthusiasts and industry professionals...
- Sticky
- Article
Good to know thanks, one can never have enough places to source parts from!
- Electrical2go
- Forum Sponsor News and Offers
- 4
- 800
- Article
OFFICIAL SPONSORS
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then...
- Dan
- Forum Sponsor News and Offers
- 0
- 829
Similar threads
Thank you
- dj unsung
- The Welcome Forum
- 9
- 880
If you google '4nway led driver' youshould find something suitable. As mentioned make sure the driver is rated higher than the wattage of tape...
- Dave8989
- Lighting Forum
- 2
- 375
OFFICIAL SPONSORS
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc
YOUR Unread Posts
-
Thermostat ProblemI have been through your post and the green light is showing on the BDR91 all the time. I looked...
- Latest: Chewy56
-
What is your hourly rate as a self employed electrician? (2024-25)I did a poll last year (and the year before) on exactly this. Below I have pasted what I wrote...- Latest: HappyHippyDad
-
Todays fault findingI think you're going to have to draw us a picture, HHD. Gut feeling says there are 2 faults...- Latest: happysteve
This website was designed, optimised and is hosted by untold.media Operating under the name Untold Media since 2001.