RCBOs for Schneider CU

[John-SJW]

The CU box is called a 'compact' and although a decent size, when an RCBO is istalled, it will fit but there is not much room at the top and those RCBOs are taller at the top. Does anyone know of another make rather than Schneider, that fit, that maker shorter RCBOs?

 

[westward10]

Yes Schneider.

 

[MJPD29]

I wouldn't advise fitting another brand of rcbo in that board. Why not just get a schneider one? It will fit

 

[John-SJW]

I wouldn't advise fitting another brand of rcbo in that board. Why not just get a schneider one? It will fit

I never knew they made a shorter RCBO. Want ideally short RCBO with no earth flylead.

 

[telectrix]

all that wasted space below. why did they not mount the gear lower?

solution....buy a different brand.

 

[westward10]

I never knew they made a shorter RCBO. Want ideally short RCBO with no earth flylead.

It is what it is you fit a compatible device an Easy 9 rcbo.

 

[John-SJW]

Also want DP RCBOs in the CU.

 

[westward10]

Also want DP RCBOs in the CU.

You are stuck then because the Schneider ones are single pole.

 

[nicebutdim]

Also want DP RCBOs in the CU.

You could fit a new CU with SP+N RCBOs, for less than the price of populating that board with Easy 9 RCBOs.

 

[MJPD29]

You'll need a new consumer unit then. The compatible rcbo is easy9. Irrelevant whether you want it or not, that's what should be fitted.

 

[John-SJW]

You could fit a new CU with SP+N RCBOs, for less than the price of populating that board with Easy 9 RCBOs.

The idea is to remove one RCD, keeping one, with most circuits off the one RCD and four or five RCBOs. Five RCBOs is about £130.

So, first look, RCBO - £11.94.

FuseBox RTA063230B 32A SPN RCBO Type A B Curve 30mA 6kA | Mastertrade

FuseBox RTA063230B Type A RCBO. It comes with B Curve, 32A rated current, 30mA residual current, and 6kA rated breaking capacity.

mastertrade.co.uk

Straight Consumer Unit Isolater Incomer with Surge Protection

<p>A range of mains switch fuse boards Complete with Surge protection devices available for 2 to 36 ways in metal or plastic. Brand includes; Fusebox, Hager & Live Electrical<br></p>

mastertrade.co.uk

Fusebox make decent stuff. No real bad reports coming about them. You could have 10 RCBOs all in a new CU with and SPD for £171. So worth considering. The Schneider used for the garage.

 

[nicebutdim]

The idea is to remove one RCD, keeping one, with most circuits off the one RCD and four or five RCBOs. Five RCBOs is about £130.

So, first look, RCBO - £11.94.

FuseBox RTA063230B 32A SPN RCBO Type A B Curve 30mA 6kA | Mastertrade

FuseBox RTA063230B Type A RCBO. It comes with B Curve, 32A rated current, 30mA residual current, and 6kA rated breaking capacity.

mastertrade.co.uk

Straight Consumer Unit Isolater Incomer with Surge Protection

<p>A range of mains switch fuse boards Complete with Surge protection devices available for 2 to 36 ways in metal or plastic. Brand includes; Fusebox, Hager & Live Electrical<br></p>

mastertrade.co.uk

Fusebox make decent stuff. No real bad reports coming about them. You could have 10 RCBOs all in a new CU with and SPD for £171. So worth considering. The Schneider used for the garage.

It's RATM RCBOs that are SP+N. Your link is full size SP.

 

[timhoward]

The idea is to remove one RCD, keeping one, with most circuits off the one RCD and four or five RCBOs.

That would be a little unusual. It sometimes happens to facilitate modifying a lighting circuit in an existing split load board, but my gut reaction is that I would either go dual-RCD or entirely RCBO for a new install. Was there any reason for that idea or was it economics?

Fusebox make decent stuff. No real bad reports coming about them

My go-to board for most domestic installs at the moment. I'm just about to go and pick one up. As above you want the shorter double pole RCBO's.
If it's a very classy house, the car on the drive is recent, clean, and had loads of tread on the tyres then I might quote for Hager....!

 

[nicebutdim]

That would be a little unusual. It sometimes happens to facilitate modifying a lighting circuit in an existing split load board, but my gut reaction is that I would either go dual-RCD or entirely RCBO for a new install. Was there any reason for that idea or was it economics?

My go-to board for most domestic installs at the moment. I'm just about to go and pick one up. As above you want the shorter double pole RCBO's.
If it's a very classy house, the car on the drive is recent, clean, and had loads of tread on the tyres then I might quote for Hager....!

In that latter instance, I'd go with Crabtree for ease of installation.

 

[John-SJW]

It's RATM RCBOs that are SP+N. Your link is full size SP.

Just giving an e.g. of how well priced they are.