Rcd Board with round knockouts

[suffolkspark]

Hi all, im having a mare trying to find a board that suits my requirements. Can anybody reccomend a sensibly priced off the shelf solution.

I sinlmply want a 100A 30mA upfront type A rcd.
10 usable ways (no size constraint so can be bigger)
ROUND KNOCKOUTS

So many now seem to have square knockouts and I've got lots of 20mm swa and 20mm conduit to bring in.

Hager either have square ko or no ko in that size. lewden all square knockouts, mk and Eaton seem to be type AC rcds.

Help

 

[Julie.]

Fusebox?

 

[buzzlightyear]

Try axiom. They are good.

 

[pc1966]

The Wylex board I had recently was all round holes on the sides/top/bottom (square on the back).

Do you really want a 30mA up-front? That seems a bit low for 10 circuits (though maybe they are all low-leakage ones).

The Wylex type A RCD one CEF stock is 80A so would have to look if they do it in 100A.

 

[telectrix]

fit some galv trunking on top. SWA gland and conduit into that and tails into DB through square knockouts.

 

[pc1966]

Yes, seems they do:

Wylex WRDS100/2 RCD DP Class A 100A 30mA

<p>Wylex are the market leader in residential circuit protection, with the largest range of consumer units and RCDs in the UK. This gives designers and installers the flexibility to create an almost infinite variety of systems, tailored to individual applications and blending with any...

www.tradesparky.com

 

[Andy78]

Hager with no knock outs sounds perfect as you can drill them where you want.

 

[pc1966]

I think @telectrix solution is really by far the best, as very likely you won't have enough knock-outs of the size you want on one side.

 

[Risteard]

Hager either have square ko or no ko in that size.

You should be able to get a round knockout Hager one with the suffix "RK" at the end of the product code.

 

[suffolkspark]

Are the axiom type A rcds? I'll have to check, wylex sounds like best contender, 80A incomer will suffice as it's a submain.

I dont wanna messabout with galv trunking etc just wannataje my nice 20mm items into nice 20mm holes
[automerge]1588782629[/automerge]
I have been speaking to hager technical and he didnt mention that, their catalogue is a nightmare

 

[telectrix]

I think @telectrix solution is really by far the best, as very likely you won't have enough knock-outs of the size you want on one side.

need to check the depth of the box before the lid and if insufficient depth, space the trunking off by 1/8" or so.

 

[suffolkspark]

need to check the depth of the box before the lid and if insufficient depth, space the trunking off by 1/8" or so.

It's all on show so want it to look good. Just looking for that on the shelf item that should exist

 

[pc1966]

need to check the depth of the box before the lid and if insufficient depth, space the trunking off by 1/8" or so.

It is 85mm from the panel it is fixed to, up to the edge of the lid. So up to 75mm truncking should be fine.

 

[telectrix]

It's all on show so want it to look good. Just looking for that on the shelf item that should exist

plenty room here for 20mm holes. easy drill as well:

 

[suffolkspark]

@pc1966

The wylex NMRS1106L looks spot on, I use wylex 3 phase stuff so would be good to move to 1 brand, but I cant see if it's a type A rcd anywhere,