Rechargeable Green Laser Level recommendations | on ElectriciansForums

Discuss Rechargeable Green Laser Level recommendations in the Electrical Tools and Products area at ElectriciansForums.net

RDB85

-
Trainee
Joined
Nov 23, 2017
Messages
1,085
Reaction score
176
Location
Liverpool
I’m looking to buy a green laser level. I’ve seen this one which looks decent:

 
As an eBay Associate we earn from qualifying purchases.
It might be the greatest laser level ever built, but I've no way of knowing. What in particular do you think looks decent about it?

I'm certainly open to trying off-brand products, but at £350 I'd want to be very certain about accuracy and build quality.
 
It might be the greatest laser level ever built, but I've no way of knowing. What in particular do you think looks decent about it?

I'm certainly open to trying off-brand products, but at £350 I'd want to be very certain about accuracy and build quality.

It’s 60m distance
20 hour battery

Are just two. It’s got really good reviews online and I know a few people in the trade that have used Dewalt, Bosch etc and have used this and found it to be better.

I’ve use Milwaukee but their 12v laser is a tad on the extremely expensive side.

The laser on its own is £165. But the whole kit seems good value. I can’t seem to find anything by other manufacturers that is as good for the price and bundle.
 
If it meets your needs and gets decent reviews, then I'm not sure what else there is to add. The only issue remaining is for you to decide whether or not to buy it.

There are no right answers about laser levels and choices boil down to avoiding wrong decisions - on that front you appear to have checked the necessary details.
 
I've the Dewalt DCE088D1G, have had it for over 4 years now. Don't know how long a battery lasts as I have other battery's for it, but it's used a lot and we aren't charging it often at all. Amazon here seems to be the best price for it, just add a 2nd battery at £20-£30 and you'll never be beat. While not a huge range there are some other 10.8v Dewalt tools the batteries work with. The impact driver I have is pretty good. Laser is used very regularly and I've not been on any job where it's not up to the task.

4 years since I bought it and if the batteries or charger [charger is the same as does the 18v tools as well] fail I can still buy original dewalt ones for not too hefty a price which is reassuring. Also lots of chinese replica's of the batteries, but I'd expect the original batteries to be around for many many years to come.
 
As an Amazon Associate Electricians Forums may earn a small commission from qualifying purchases.
I've the Dewalt DCE088D1G, have had it for over 4 years now. Don't know how long a battery lasts as I have other battery's for it, but it's used a lot and we aren't charging it often at all. Amazon here seems to be the best price for it, just add a 2nd battery at £20-£30 and you'll never be beat. While not a huge range there are some other 10.8v Dewalt tools the batteries work with. The impact driver I have is pretty good. Laser is used very regularly and I've not been on any job where it's not up to the task.

4 years since I bought it and if the batteries or charger [charger is the same as does the 18v tools as well] fail I can still buy original dewalt ones for not too hefty a price which is reassuring. Also lots of chinese replica's of the batteries, but I'd expect the original batteries to be around for many many years to come.
I'm sure the DeWalt is an excellent laser, but it doesn't do 360⁰ horizontal and overhead lines, nor does it have 3 of them.
 
As an Amazon Associate Electricians Forums may earn a small commission from qualifying purchases.
Not sure what I'll do when the current laser level needs to be replaced, but hopefully that's many years away. Can't see myself paying the money for Makita's 360 level and don't like the idea of carrying another type of batteries & charger.

I use Eneloop rechargeable batteries and find they last as long as regular Duracell - roughly two full days from a set and half a dozen extra AAs take up next to no toolbox space.
 
I use two lasers. One of them is the DeWalt (red) the other bosch (green) When I set up ceiling mounted 600 x 600 LED panels I need two lasers for the cross laser effect for placement. I am a bit suspicious of the 60 foot laser thing. I suppose it is possible. On a sunny day I can struggle with seeing the laser even at short distances.
I must admit that one looks very handy, notice it is done in a semi-darkened room though. Like the manual mode as well.
 
I'm sure the DeWalt is an excellent laser, but it doesn't do 360⁰ horizontal and overhead lines, nor does it have 3 of them.
They do the 360⁰ and many other versions also👍 I was only referencing what I have, and I'm kinda at a loss as to what I'd do differently with a 360⁰ laser- where does its use like to a spark that a cross line laser doesn't?
 
I'm very wary of lasers of any type made by unknown or budget brands as I value my eyesight far too much to risk it.

I've had a simple red dewalt laser level for years and it does all I need, but then I still prefer a chalk line when I can use it.
 
sod that cost. a chalk line is about £3. only drawback is is the amount of beer consumed before measuring.
Chalk line is still extremely useful, but it's not £3 no more, refills are about a fiver, half decent chalk line and chalk about £12. Well worth having, not much use for setting boxes and the like.
 
I'm very wary of lasers of any type made by unknown or budget brands as I value my eyesight far too much to risk it.

I've had a simple red dewalt laser level for years and it does all I need, but then I still prefer a chalk line when I can use it.
I dunno how you can say it's made by an unknown...the seller has listed there details and it's clearly a well known household name. And this isn't spoof, its from the ebay listing in the opening post.
[ElectriciansForums.net] Rechargeable Green Laser Level recommendations
 
Last edited:

Reply to Rechargeable Green Laser Level recommendations in the Electrical Tools and Products area at ElectriciansForums.net

News and Offers from Sponsors

  • Article
Join us at electronica 2024 in Munich! Since 1964, electronica has been the premier event for technology enthusiasts and industry professionals...
    • Like
Replies
0
Views
373
  • Sticky
  • Article
Good to know thanks, one can never have enough places to source parts from!
Replies
4
Views
939
  • Article
OFFICIAL SPONSORS These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then...
Replies
0
Views
1K

Similar threads

  • Question
That is good. So good, in fact, that it’s my new profile pic
    • Like
Replies
2
Views
751
Also good for cutting strands of cable armour, although I try to restrict their use to copper.
Replies
6
Views
969
nicebutdim
N

Electricians Tools | Electrical Tools and Products

Thanks for visiting ElectriciansForums.net, we hope you find the Electricians Tools you're looking for. It's free to sign up to and post a question yourself to find a tool or tool supplier either local to you, or online. Our community of electricians and electrical engineers will do their best to find the best tool supplier for you.

We also have a Tiling Tools advice from the worlds largest Tiling community. And then the Plumbers Forums with Plumbers Tools Advice.

Search Electricans Forums by Tags

OFFICIAL SPONSORS

Electrical Goods - Electrical Tools - Brand Names Electrician Courses Green Electrical Goods PCB Way Electrical Goods - Electrical Tools - Brand Names Pushfit Wire Connectors Electric Underfloor Heating Electrician Courses
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc

YOUR Unread Posts

This website was designed, optimised and is hosted by untold.media Operating under the name Untold Media since 2001.
Back
Top