Right place, right time | on ElectriciansForums

Discuss Right place, right time in the UK Electrical Forum area at ElectriciansForums.net

D

Darkwood

Just been to quiz night at the local and as the quiz just finished we had a total power failure, now been the local I mean local as im 200yrds down the road.. so got my gear and came back, after a bit of humming and harrring I told landlord the cutout has gone and to ring the emergency call out number to which he did.

40mins later (excellent service) guy turns up so landlord left it to me to explain....


"I said the cutout fuse has gone, the service cable is warmer than the 16mm tails so suggest the cutout has a burnt out primary fuse pin" ... looking at me he says he wont know until he's cut the seal and checked --- I'm proud to say I nailed the diagnosis .... fuse failed incoming live link burnt out and new service head needed :)

As he walked out he said how the hell did you know...so said you can open the cutout to see what is wrong and don't have the limitations I do, so using my knowledge and experience I used the temp' of the cables to identify it wasn't a normal overload but a terminal failure on the DNO side as I could see the supply cable easily matched the 16mm tails off the cutout yet they were cooler.... 1 bloke walking away impressed and me now a drunk CSI candidate ;)

Oh! and free beer night coming up!
 

Reply to Right place, right time in the UK Electrical Forum area at ElectriciansForums.net

News and Offers from Sponsors

  • Article
Join us at electronica 2024 in Munich! Since 1964, electronica has been the premier event for technology enthusiasts and industry professionals...
    • Like
Replies
0
Views
373
  • Sticky
  • Article
Good to know thanks, one can never have enough places to source parts from!
Replies
4
Views
939
  • Article
OFFICIAL SPONSORS These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then...
Replies
0
Views
1K

Similar threads

Yes the first bit is just standard wiring, TNS lead cable into cut-out, cut-out to meter, meter to DP isolator, top of isolator is sealed as per...
Replies
8
Views
1K
Hello Brianmoooore, Thanks for yor reply - Sorry that I did not see your message until today - the Forum replies notification emails about your...
Replies
7
Views
670

OFFICIAL SPONSORS

Electrical Goods - Electrical Tools - Brand Names Electrician Courses Green Electrical Goods PCB Way Electrical Goods - Electrical Tools - Brand Names Pushfit Wire Connectors Electric Underfloor Heating Electrician Courses
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc

YOUR Unread Posts

This website was designed, optimised and is hosted by untold.media Operating under the name Untold Media since 2001.
Back
Top