Does anyone still use a Robin KMP4120 loop tester?I just wondered as there always seems to be a demand for them on Ebay and I believe its the only one to use DC to lock the RCD rather than reducing the test current to 15ma or so.
Discuss Robin KMP4120DL in the Electrical Tools and Products area at ElectriciansForums.net
S
Spudnik
Yep i do!!!!!!!!!!!! 
Only problem is D-lok can be hit and miss on certain MCB's.
Only problem is D-lok can be hit and miss on certain MCB's.
Hi i use a 420 dl and i agree they will sometimes still knock rcd out when testing 6a mcbs
Reply to Robin KMP4120DL in the Electrical Tools and Products area at ElectriciansForums.net
News and Offers from Sponsors
- Article
Join us at electronica 2024 in Munich! Since 1964, electronica has been the premier event for technology enthusiasts and industry professionals...
- Sticky
- Article
Good to know thanks, one can never have enough places to source parts from!
- Electrical2go
- Forum Sponsor News and Offers
- 4
- 898
- Article
OFFICIAL SPONSORS
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then...
- Dan
- Forum Sponsor News and Offers
- 0
- 1K
Similar threads
Ok so just done a quick test on mine.
Megger mft on high gives 0.30
Robin 4120dl on 20ohm hives 0.22
Robin 4120 on 200ohm gives 0.28
Bearing in...
- Initforthemoney
- Electrical Wiring, Theories and Regulations
- 5
- 707
KT66EVA (KT66DL & KEWEVA) - ÂŁ1073.60 + VAT if you shop about as a combo
- timhoward
- Electrical Tools and Products
- 5
- 617
Electricians Tools | Electrical Tools and Products
Thanks for visiting ElectriciansForums.net, we hope you find the Electricians Tools you're looking for. It's free to sign up to and post a question yourself to find a tool or tool supplier either local to you, or online. Our community of electricians and electrical engineers will do their best to find the best tool supplier for you.
We also have a Tiling Tools advice from the worlds largest Tiling community. And then the Plumbers Forums with Plumbers Tools Advice.
OFFICIAL SPONSORS
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc
YOUR Unread Posts
-
Existing Consumer Unit close to vertical waste pipeso i have finally received the EICR report today. So there are only 5 off C2 findings. One...
- Latest: Netzero1967
-
Xmas lightsI beg to differ. A BS 1363 plug can have a solid plastic pin for use as an Insulated shutter...- Latest: Tom256
-
Contactor not latchingYes that's right, nothing in 21. I'll add that there was a second heavy duty mixer/blender right...
- Latest: An BuachaillĂn Bán
This website was designed, optimised and is hosted by untold.media Operating under the name Untold Media since 2001.