Smoke Alarm Help | on ElectriciansForums

Discuss Smoke Alarm Help in the DIY Electrical Advice area at ElectriciansForums.net

Joined
Aug 23, 2019
Messages
1
Reaction score
0
Location
Wasilla Alaska
I have interconnected smoke alarms. One started beeping. So I replaced batteries in all alarms. Still beeping. So I bought new alarms, replaced hardwired harnesses that came with alarms and all new batteries. Still beeping. All are showing green lights. I have hit test/reset buttons and still have beeping. Help!!
 
You don’t have a carbon monoxide detector somewhere as well do you. Had this before and the customer had forgotten about it. it was the battery in this.
I got told that you should not interconnect smoke/heat with C/O.
 
Read instructions carefully .
I have one that intermittently bleeps ,to
tell you you pressed the button to "Park it in a Less sensitive state " Needs a press to get back to normal sensitivity .
(This state the Nagging goes on)
( Some models have 10 yr batteries .. confusing to look at -No battery hatch )
..can be upset by high humidity -
(take outside for fresh air-if detachable)
...My last "GUESS" there is an Error in the interconnect ..! Current Instructions /essential.
 
If ruling out all battery and connection problems doesn't sort it,get a vaccuum cleaner and suck all the crap out
 
If ruling out all battery and connection problems doesn't sort it,get a vaccuum cleaner and suck all the crap out
If it’s the new aico series smoke alarms that’s beeping then you’ve got a fault they have a lithium battery built in although you just said you replaced battery so you’ve got the old model get rid and upgrade to the new ones mate all the old ones are now getting replaced in my area bit pricey but 10x better most councils are going for the new models
 
If it’s the new aico series smoke alarms that’s beeping then you’ve got a fault they have a lithium battery built in although you just said you replaced battery so you’ve got the old model get rid and upgrade to the new ones mate all the old ones are now getting replaced in my area bit pricey but 10x better most councils are going for the new models
And make sure the smoke alarms are fed from lighting circuit and not on individual circuit as most customers will turn off mcb and get hammer to all the old smokes with replaceable batteries not safe at all I always incorporate smoke alarms on upstairs lights to prevent customer turning off they save lives
 

Reply to Smoke Alarm Help in the DIY Electrical Advice area at ElectriciansForums.net

News and Offers from Sponsors

  • Article
Join us at electronica 2024 in Munich! Since 1964, electronica has been the premier event for technology enthusiasts and industry professionals...
    • Like
Replies
0
Views
378
  • Sticky
  • Article
Good to know thanks, one can never have enough places to source parts from!
Replies
4
Views
953
  • Article
OFFICIAL SPONSORS These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then...
Replies
0
Views
1K

Similar threads

Thank you all, yes I didn’t think they do and I have done minor works but the helpline was not very helpful. Got my yearly assessment soon so I...
Replies
4
Views
302
As above. If corrosion or moisture hasn't affected the pcb, there are other possibilities - electrolytic capacitors deteriorated etc. A long shot...
Replies
2
Views
438

OFFICIAL SPONSORS

Electrical Goods - Electrical Tools - Brand Names Electrician Courses Green Electrical Goods PCB Way Electrical Goods - Electrical Tools - Brand Names Pushfit Wire Connectors Electric Underfloor Heating Electrician Courses
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc

YOUR Unread Posts

This website was designed, optimised and is hosted by untold.media Operating under the name Untold Media since 2001.
Back
Top