supply to garage ........

[ez2own]

Hi all , have a predicament to share , need to get 10mm swa from house 20' to garage , (to supply 5amp electric garage door and 1 internal florescent , ways and means to get back to cu looks like a minefield without tearing the floor and house up .
would it be possible to radial off ring final circuit with fuse spur , as long as load didn't over step 13 amp fuse spur ??

any thoughts would be appreciated .... thanks

 

[trev]

Why 10mm with only that load mate? It'll be a hell of a struggle to terminate a 10mm swa into a fused spur.

 

[ez2own]

Why 10mm with only that load mate? It'll be a hell of a struggle to terminate a 10mm swa into a fused spur.

Sorry trev good point , apologies 2.5 swa

 

[trev]

Thats more like it hehe.

 

[trev]

If. for example, you were spurring off from a ring straight through a wall if the cable was adequately protected would that be acceptable?

 

[ez2own]

If. for example, you were spurring off from a ring straight through a wall if the cable was adequately protected would that be acceptable?[/QUOTE

if protected i would say yes ?

 

[trev]

So I'm guessing that you know about supporting and protecting a cable and how to extend a circuit safely and how to consider any additional load on an existing circuit?

 

[Octopus]

and the dreaded RCD's and notification

 

[ez2own]

So I'm guessing that you know about supporting and protecting a cable and how to extend a circuit safely and how to consider any additional load on an existing circuit?

yes thanks all good in those departments , thanks again