Tenant refusing access for test and inspection | Page 2 | on ElectriciansForums

Discuss Tenant refusing access for test and inspection in the Periodic Inspection Reporting & Certification area at ElectriciansForums.net

I meant 'stay away' from the legal wranglings. :) The customer knows I will do out of hours if he requests it but considering there has been a bit of a stale mate for this long, I think he is holding his ground. This is the thing, I don't know where anyone really stands in this, hence the thread.
See post 6
 
M
Good afternoon,

A client wants my company to access a commercial property (shop) to carry out some remedial works and subsequent test. The owner of the company is refusing to shut down his business (perhaps understandably) to allow this to happen. I was just wondering what the usual procedure would be here? Arrange to do the work out of hours (as requested by the owner) and add it to the tenancy cost for next year? Or would the landlord be in his rights to order the shop to shut down whilst the necessary works are done? Does the landlord have to suck it up or does the tenant? Is there a middle ground I am not aware of?

I guess its not really my business as I am just subcontracted by the landlord but after the horrific events in London this morning, I'm interested to know where the landlord would stand on the issue, as peoples safety is paramount.

Thanks,

LBS
My view is that the installation needs to be certified as safe for continued use so on that basis the landlord is obliged to provide this and the tenant has no right to deny access for essential maintenance. If you are not prepared or able to do the job at a time when the business is closed then the business will just have to close for a day
 
tenant growing weed in attic, meter bypassed, permission to get access denied. ??????
 
Bs

ok clever clogs where does any legislation state an electrical installation does not need to be safe? Clown

Your comment included "is obliged to" which with lots of landlords means it would need to be law.

There is no legal requirement to test and check electrical installations in England, Wales and N.I as far as I am aware.

So no I'm not being a clown.....
 
Your comment included "is obliged to" which with lots of landlords means it would need to be law.

There is no legal requirement to test and check electrical installations in England, Wales and N.I as far as I am aware.

So no I'm not being a clown.....
The landlord is indeed obliged to provide a safe installation and the standard measurement we use in this country to verify safety is by certification . Furthermore I never inferred the landlords obligation to provide a safe installation is exclusively due to legislation,morally the landlord is obliged to do so.
Now stop being silly or you will get a cyber good hiding (again)
 
The landlord is indeed obliged to provide a safe installation and the standard measurement we use in this country to verify safety is by certification . Furthermore I never inferred the landlords obligation to provide a safe installation is exclusively due to legislation,morally the landlord is obliged to do so.
Now stop being silly or you will get a cyber good hiding (again)

Best you confirm the legal requirements to me ........ And countless landlords do not provide safe installations..... So who is responsible for policing this?
 

Reply to Tenant refusing access for test and inspection in the Periodic Inspection Reporting & Certification area at ElectriciansForums.net

News and Offers from Sponsors

  • Article
As the holiday season approaches, PCBWay is thrilled to announce their Christmas & New Year Promotions! Whether you’re an engineer or an...
Replies
0
Views
488
  • Article
Bloody Hell! Wishing you a speedy recovery and hope (if) anyone else involved is ok. Ivan
    • Friendly
    • Like
Replies
13
Views
962
  • Article
Join us at electronica 2024 in Munich! Since 1964, electronica has been the premier event for technology enthusiasts and industry professionals...
    • Like
Replies
0
Views
901

Similar threads

The challenge that you have with this is that you've no confirmed start point. Because you have a lack of an EICR you don't actually know what...
Replies
7
Views
740
  • Question
Hi Gingerrubix, The fact that your previous Tenant replaced a faulty socket plate which he used for an external EV, raises an eyebrow. Also your...
2
Replies
25
Views
3K

OFFICIAL SPONSORS

Electrical Goods - Electrical Tools - Brand Names Electrician Courses Green Electrical Goods PCB Way Electrical Goods - Electrical Tools - Brand Names Pushfit Wire Connectors Electric Underfloor Heating Electrician Courses
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc

YOUR Unread Posts

This website was designed, optimised and is hosted by untold.media Operating under the name Untold Media since 2001.
Back
Top