The metal thingy for spacing drill

[the pict]

Lost my thing as above, you know the thing bent metal thing with two holes spaced for doubles and an extra hole for duals tried umpteen search terms but all I get is the pattress and drywall template any ideas
P

 

[Leesparkykent]

Lost my thing as above, you know the thing bent metal thing with two holes spaced for doubles and an extra hole for duals tried umpteen search terms but all I get is the pattress and drywall template any ideas
P

What wrong with just using a ko box like normal? :stuart:

 

[davesparks]

As much as the OP makes no sense at all I think I actually know what he's talking about!

I think it's a part of the armed box cutting tool set where you have a big round drill to cut most of the material then a square kango bit to finish it off.

It wouldn't be hard to make replacement for the bit you've lost, just get a bit of mild steel bar, drill holes in the right places and tap the hole in the middle and fit a bolt.

 

[IzzyS]

EBS Electrical Box Sinkers & Accessories

Part Number: RCEBSDBLTEMP

 

[the pict]

Its part of my arneg kit, if doing a whole wall into block this makes the job a lot quicker, one man drills and chops the square, the guide spaces the plug holes, my mate then fits and screws the boxes in place, grommets and drops cables, other wise its drill down hold up a box mark the holes drill them, then next box, wearing tiring and slow, trust me i'v timed it, its a waste of the second man as he hangs about waiting,
P

 

[the pict]

Oh Ta IzzyS saved my arse
Pict

 

[richy3333]

Lost my thing as above, you know the thing bent metal thing with two holes spaced for doubles and an extra hole for duals tried umpteen search terms but all I get is the pattress and drywall template any ideas
P

Has somebody been at the uisge beatha?

 

[the pict]

On the Sabbath, Heavens forfend, Vodka And Coke, ? well the minister has never mentioned it....... So

 

[7029 dave]

EBS Electrical Box Sinkers & Accessories

Part Number: RCEBSDBLTEMP

How much does that little lot come in at, looked at the vid am impressed.

 

[Leesparkykent]

How much does that little lot come in at, looked at the vid am impressed.

https://www.google.co.uk/shopping/p...Os8cCFa6P2woddB0KGQ&ei=TKjTVdf6Oa6f7gb0uqjIAQ

http://www.amazon.co.uk/Quadcut-Square-Cutter-Electrical-Sinker/dp/B007AGBOB6

 

[7029 dave]

Cheers Lee.

 

[telectrix]

seen 'em all. bouncing off the brick. 110V SDS with scutch chisel does it i 1/4 the time.

 

[the pict]

For engineered brick..........C4 :smug2:

 

[shanky887614]

seen 'em all. bouncing off the brick. 110V SDS with scutch chisel does it i 1/4 the time.

even grinder and cold chisel is quicker, i dont know where my bolster is i just end up using a cold chisel instead either by hand or in sds

 

[Leesparkykent]

I find them ok, I would rather use one than a grinder for cutting a box out neatly.