the most important tools for starting off! | Page 3 | on ElectriciansForums

Discuss the most important tools for starting off! in the Electrical Tools and Products area at ElectriciansForums.net

I would add a pair of safety glasses and wear them whenever anything could potentially fly, pop, or spring off. Expect some people to take the mick, but you only get one pair of eyes.
 
yes, the blade is locked till you press the button at the back to unlock it (so its at 45o) then hold the little one near the blade.

i prefer folding to sliding blades because your less likely to stab yourself

Cheers, never stabbed myself though? A few old scars on the left hand from being young and stupid! I have drilled my left leg with a 4mm drill bit down to the bone once, but that is another story.


If anyone has a FatMax Stanley knife may I ask, dose the blade fall out whilst doing a long cut, eg floor board tongue & grove/plaster board? The quick change over of blades is a great idea but when using the knife the mechanical parts inside that should hold the blade in place fails? May try an Irwin next.

I have the both Fatmax knives, the twin blade and the single. The single has no issues but the twin blade often lets go of of the left side blade which is very annoying
 
we are doing safe isolation at college at the minute so doing it on site would actually be pretty useful, as we all know doing it on paper and doing it in real life is completely different, i wish most of you were my gaffs, literally had to buy everything myself, including a van! I'm also 25 and ive been an apprentice before so skin is more than capable of handling banter ha :)
 
Last edited:

Reply to the most important tools for starting off! in the Electrical Tools and Products area at ElectriciansForums.net

News and Offers from Sponsors

  • Article
Join us at electronica 2024 in Munich! Since 1964, electronica has been the premier event for technology enthusiasts and industry professionals...
    • Like
Replies
0
Views
378
  • Sticky
  • Article
Good to know thanks, one can never have enough places to source parts from!
Replies
4
Views
953
  • Article
OFFICIAL SPONSORS These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then...
Replies
0
Views
1K

Electricians Tools | Electrical Tools and Products

Thanks for visiting ElectriciansForums.net, we hope you find the Electricians Tools you're looking for. It's free to sign up to and post a question yourself to find a tool or tool supplier either local to you, or online. Our community of electricians and electrical engineers will do their best to find the best tool supplier for you.

We also have a Tiling Tools advice from the worlds largest Tiling community. And then the Plumbers Forums with Plumbers Tools Advice.

Search Electricans Forums by Tags

OFFICIAL SPONSORS

Electrical Goods - Electrical Tools - Brand Names Electrician Courses Green Electrical Goods PCB Way Electrical Goods - Electrical Tools - Brand Names Pushfit Wire Connectors Electric Underfloor Heating Electrician Courses
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc

YOUR Unread Posts

This website was designed, optimised and is hosted by untold.media Operating under the name Untold Media since 2001.
Back
Top