About to fit new consumer unit in stable block. TT
Intention was to fit with 100A 300MA timedelay rcd incommer with split load on x 2 63A rcd's - one at 100MA for lights etc and one at 30MA for sockets.
Question is - supplier has supplied incorrect incommer which is now 100MA timedelay rcd. As this is better protection is there any reason why this cannot be fitted.
Intention was to fit with 100A 300MA timedelay rcd incommer with split load on x 2 63A rcd's - one at 100MA for lights etc and one at 30MA for sockets.
Question is - supplier has supplied incorrect incommer which is now 100MA timedelay rcd. As this is better protection is there any reason why this cannot be fitted.
