Twist or no twist

[cliffed]

Remembering back when I first started electrical 1970 the guys always twisted cables, one piece of green sleeving & twisted like a corkscrew,so tight when you separated them they bust off @ the ends.
2.5 mm twisted @ sockets & in connectors...these days wagos come to the rescue,does anyone twist the earth“s now @ sockets.
Just wondering I know it’s a No No with the new lads now.

 

[Pete999]

Remembering back when I first started electrical 1970 the guys always twisted cables, one piece of green sleeving & twisted like a corkscrew,so tight when you separated them they bust off @ the ends.
2.5 mm twisted @ sockets & in connectors...these days wagos come to the rescue,does anyone twist the earth“s now @ sockets.
Just wondering I know it’s a No No with the new lads now.

DO NOT TWIST makes testing a pain and is also unprofessional.

 

[JBW175]

Twisting is the devils work, although I realise it was the right way years ago.

And then putting CPC’s all in one sleeving, seriously, who does that? ??

 

[Mike Johnson]

DO NOT TWIST makes testing a pain and is also unprofessional.

Interesting that what used to be the sign of a professional is now considered unprofessional, I wonder when that changed, rhetorical question.

 

[snowhead]

I was a twister, a wire end doubler, a Ring main labeller and a Fused spur fitter.
However I've succumbed to modern practice, I even use Wagos.

But be aware things are forever changing and in the future, current practices could likely be frowned upon.
Especially this practice of using 240volts within properties.

 

[Mike Johnson]

And using torque screwdrivers that split the unit in half when used at anything over hand tight. ?

 

[ipf]

I was a twister, a wire end doubler, a Ring main labeller and a Fused spur fitter.
However I've succumbed to modern practice, I even use Wagos.

But be aware things are forever changing and in the future, current practices could likely be frowned upon.
Especially this practice of using 240volts within properties.

Me too.....gave 'em up donkeys years back.
......but your in for it... for mentioning 240, these days.

 

[Dustydazzler]

I started electrics in the late 90s and was told never twist solid cores as it makes them brittle

That said I have worked with older sparks who twist solid cores together as their line of thinking was if the terminal screw came loose then the cores are still making good contact with each other due to the twists.
which when you think about it actually makes some sense

 

[telectrix]

I started electrics in the late 90s and was told never twist solid cores as it makes them brittle

That said I have worked with older sparks who twist solid cores together as their line of thinking was if the terminal screw came loose then the cores are still making good contact with each other due to the twists.
which when you think about it actually makes some sense

if the screws are properly tightenred, they won't come loose .twisted solid cores can snapthrough metal fatigue. 6 or half a dozen?

 

[snowhead]

Me too.....gave 'em up donkeys years back.
......but your in for it... for mentioning 240, these days.

I'm not fooled by the pseudo label of 230v, it's just a paper exercise.

 

[ipf]

I'm not fooled by the pseudo label of 230v, it's just a paper exercise.

If you want to come that, I'm not by the fused spur fitting......or the RM labels, come to that.

 

[static zap]

wonder when that changed, rhetorical question.

... I know its not a question .. But here's an answer or two.

-- Cost cutting -More speed -Less sound engineering-
-JUST in case...Gets shoved under the carpet.

a).. So the Quality of the screwed containment has gone up ? ..

(Screwed -is the appropriate word) .. Time is money .
(a bit like wet pants using - Plastic for cold water )
..and a whole new Legionella -prevention business (scam)

Twisty is definitely a cause of metal fatigue IF it has to be disturbed for testing.

b) --- Less testing back then .. ?

 

[ipf]

... I know its not a question .. But here's an answer or two.

-- Cost cutting -More speed -Less sound engineering-
-JUST in case...Gets shoved under the carpet.

a).. So the Quality of the screwed containment has gone up ? ..

(Screwed -is the appropriate word) .. Time is money .
(a bit like wet pants using - Plastic for cold water )
..and a whole new Legionella -prevention business (scam)

Twisty is definitely a cause of metal fatigue IF it has to be disturbed for testing.

b) --- Less testing back then .. ?

Less testing for sure but it was for life........or ‘till it broke. ?

 

[cliffed]

Here’s one found on EICR bout 30 + years old?

 

[pc1966]

Less testing for sure but it was for life........or ‘till it broke. ?

How often are the sockets untwisted for test? I would guess only if an open ring was seen at the CU and other means of isolating the break had failed (e.g. wander lead, or shorting L-E on one leg and looking for the open L-E to short L-E at sockets, etc), so probably infrequent.

Twisting the CU wires would be an major reliability issue for EICR, etc, as they need to come out and be separated every time, but also most CU terminals are much better are taking and reliably clamping two wires than socets, etc.