twizzel

[bugsy]

Had a corker today , Em periodic, trunking and klick installation , nice job - Apart from the fact the ceilings been taped and jointed and the klicks are totally inaccesable - worst part the construction company are NIC registered - ******.s

 

[telectrix]

lump hammer

 

[Sintra]

What's wrong bugsy no hammer in the old tool kit?

 

[telectrix]

or, use a bit of style, electric saw.

 

[nickblake]

150mm hole saw then you can stick a fan in it

 

[High Tower]

or, use a bit of style, electric saw.

nah what u wanna do that for?

I vot for hammer, biggest one you can find, even better use a pickaxe!

 

[bugsy]

PAD SAW, lot's of holes - They were amazed when I told them did'nt comply with 7671 and on top of that the DALI wiring is all tied to the pipe work
It's 5years old and nobody else has flagged it up

 

[telectrix]

150mm hole saw then you can stick a fan in it

long as it's not an arsenal fan

 

[nickblake]

Drill a hole in a pipe in the room above and sit back and watch

 

[rocker]

LOL @ Dali wiring

 

[bugsy]

LOL @ Dali wiring

It's the signal cable between the dimmer rack and dali control gear in the fitting and it looks like a last min. addition right pigs ear