Vent Axia

[Iddy]

Hi

Hope everyone is well

I just require some help.. Client has a Vent axia solo plus T Fan in bathroom.. Doesn't work anymore. says it has only been in for around 3 months which seems a little less time for VA.. Has been set so when the light has been on for a around 2 mins should operate. Have taken the cover off / filter.. termination are fine.. checked voltage is fine. Now i can hear a click after 2 mins but still doesn't operate.. What other tests could i do ? Could the PCB or Motor go faulty in 3 months ?

Thanks

 

[Ducksy]

if there voltage at the fan terminals and its not spinning it can only be a faulty motor imo.

 

[telectrix]

unless there's a poor connection, breaking down under load. measure the volts at the fan with it switched on. a favorite with fans is the terminal block on the PCB. if it's been over tightened it could have a dry joint to the copper track.

 

[Iddy]

Gents thank you very much for the input will double check