which certificate to use | on ElectriciansForums

Discuss which certificate to use in the Periodic Inspection Reporting & Certification area at ElectriciansForums.net

W

waynelester

i have done some work in a kitchen.the customer required additional sockets as part of refit.the cooker circuit is no longer required and i have used this circiut to provide the additional sockets and have changed breaker to 20amp,which cert do i need minor or eic,thanks
 
if you replaced the cooker cable for the sockets and the MCB then i would say that is classed as a new circuit and requires the full test cert
 
It could be argued that because you have changed the characteristics of the protective device in the CU it should be an EIC.....too much faffing for me though,for the described job I'd do a MW as well....you are not going to be shot for not doing an EIC.
 
I have always been taught that if you change the protective device then it should be EIC, i agree with both sides here though, you are still just modifying the circuit.
 
Householders have been known to modify protective devides with no Eic, mwc, or thought for eons
Fuse wire changing is no different to mcb changing,if it was a 30 amp fuse with 15 amp replacing it

I suppose we have now gone fully opposite to the not certifying age and become over sensitive to certification

Leaving what may be the correct certification
There is already differing views,so as long as you can get the information you think is needed on the Mwc, then I would go with that :)
 
yeah, des. what happened to the good old days when we just give it a squirt with the wind up megger, switched on and see if it goes bang. no bangs, lid up and go
 
Remembering my apprentice days, we got more use out of the wind up megger by clipping the leads on to some poor fellows ears with someone winding like theres no tomorrow :)

Testing circuits was a by product of that only :eek:
 
surely if he is replacing the cable and MCB to put extra sockets in the kitchen they are on there own NEW circuit and not part of the original kitchen circuit so not a modification, am i missing something here ????
 

Reply to which certificate to use in the Periodic Inspection Reporting & Certification area at ElectriciansForums.net

News and Offers from Sponsors

  • Article
Join us at electronica 2024 in Munich! Since 1964, electronica has been the premier event for technology enthusiasts and industry professionals...
    • Like
Replies
0
Views
298
  • Sticky
  • Article
Good to know thanks, one can never have enough places to source parts from!
Replies
4
Views
807
  • Article
OFFICIAL SPONSORS These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then...
Replies
0
Views
848

Similar threads

As per above from Dave. Swap to a 63A outlet and problem goes away. What gets plugged into it is not part of an inspection.
Replies
20
Views
2K
It’s sad that you had to say no more money to them for them to pull their fingers out.
Replies
9
Views
906

OFFICIAL SPONSORS

Electrical Goods - Electrical Tools - Brand Names Electrician Courses Green Electrical Goods PCB Way Electrical Goods - Electrical Tools - Brand Names Pushfit Wire Connectors Electric Underfloor Heating Electrician Courses
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc

YOUR Unread Posts

This website was designed, optimised and is hosted by untold.media Operating under the name Untold Media since 2001.
Back
Top